Integrated Driver SolutionsTraining and VOC HubPlant Training →

How to Use the App

Guide PDF Guide Word

Getting Started

  • Open integrateddriversolutions.com/driver in Chrome (Android) or Safari (iPhone/iPad) and sign in with the email and password from your fleet manager or Integrated Driver Solutions.
  • Change your temporary password straight away under Account (or Accounts for managers) > Change my password.
  • You stay signed in on that device for 14 days. On a shared tablet, tap Sign out at the end of your shift.
  • Set up in both apps with the same email and password? Signing in here also signs you in to Plant Training, so you can switch with the button at the top without signing in again. Sign out signs you out of both.
  • Managers and Training Compliance staff can tap Dashboard → in the menu, under Home, to open the Dashboard without signing in again.
  • To install the app on a phone or tablet: on the home page (integrateddriversolutions.com) tap Download The App, then Install IDS. If there is no Install button on Android (Chrome), open the three-dot menu and tap Install app / Add to Home screen. On iPhone or iPad, open the home page in Safari, tap Share, then Add to Home Screen. IDS is one app for Driver Training, Plant Training and the Dashboard.
  • Open IDS from the new home-screen icon. It opens on the home page; tap Driver Training and sign in once. The installed app keeps you signed in for 14 days, the same as the browser.
  • Use the left-hand menu to choose a program. On a phone, tap Menu at the top.
  • Tap a section name to jump to it.

Programs in the App

  • Driver Trainer Program: for aligning all trainers to one standard. Contains the Trainer VOC.
  • New Employee Driver Program: for training new drivers on heavy vehicles, light vehicles, mini buses and coaches. Contains the Daily Training Log, New Driver VOC and follow-up table.
  • Sections marked Fillable can be completed on screen.

Completing a VOC on Screen

  • Tap Records, find or add the driver, then tap New Driver VOC or Trainer VOC. The driver's name is filled in and the VOC opens.
  • The bar at the top shows the driver, the VOC type, Draft or Complete, and how many items are rated.
  • Type the names, dates, vehicle and route in the shaded fields. Choose the vehicle or combination from the list and tick each one driven under Vehicles / configurations assessed.
  • Light vehicle, mini bus or coach: use the same New Driver VOC and mark any item that does not apply to the vehicle (for example coupling, trailer and road-train items) N/A.
  • Tick C (Competent), F (Fair, needs coaching), P (Poor, Not Yet Competent) or N/A (Not applicable) for each item. A ticked F box turns orange and a ticked P box shows a red X. Only one box can be ticked per row.
  • Check the critical-fail list first. If any critical fail occurs, stop and record it.
  • Write factual evidence in the comments fields (what you saw, where, when).
  • Complete the Outcome section and signature names.
  • The progress bar under each VOC heading shows how many items are rated and the overall result.
  • The New Driver VOC includes a Mid-trip inspection section (1B) for checks at a planned stop, including hub and brake temperatures.

Root Cause (RCA) Column

  • Each item in the New Driver VOC and the Driver Trainer VOC has an RCA box beside N/A. When you tick C, F or P, it fills in with the most likely root cause for that item.
  • The codes are: P Planning, O Observation, T Technique, VK Vehicle Knowledge (vehicle systems, couplings, braking systems and controls), J Judgment / Compliance, CM Communication.
  • The box is coloured by the rating: green for C, orange for F and red for P. Ticking N/A leaves it blank.
  • If a different cause applies, tap the box and choose another code. The Root cause legend above Section 1 of each VOC explains every code.
  • The progress bar shows when every F and P item has a root cause recorded.
  • When the VOC is marked complete, each F and P item and its root cause appears under Corrective actions on the Competency and Compliance Dashboard. A manager records the action taken and marks it completed, then a different person verifies and closes it.
  • On the Word or fillable PDF version, the RCA column is pre-filled with the same codes. Use the Root cause and corrective action record table under the legend to write the action, owner and due date.

Saving and Keeping Records

  • Every tick and entry saves automatically to your fleet's secure records a moment after you make it. A Saved message appears in the corner.
  • Entries only save while a record is open. If the top bar says No record open, start or open a record first.
  • Refreshing or closing the page does not lose your work. When you come back, the same record reopens.
  • When the assessment is finished, tap Mark complete. The record is locked and the result is recorded. If a VOC was interrupted (for example a breakdown) and marked complete before every item was rated, the assessor who started it can tap Reopen to finish it. A VOC with every item rated can only be reopened by a fleet manager. If you just need a break, you don't need to mark it complete: close the record and it stays in progress.
  • Tap Close record before starting the next person, then start a new VOC from Records.
  • To find a past VOC, tap Records > All records and search by driver name or employee number. Tap a driver's name to see their full history.
  • For a paper or emailed copy, open the record, tap Print / Save PDF and choose Save as PDF.
  • Name the file: Surname_FirstName_VOC-Type_YYYY-MM-DD.pdf (for example Smith_John_DriverVOC_2026-09-25.pdf).
  • Save PDFs to the driver's training file if your fleet also keeps paper or shared-drive records.
  • To print only the VOC (not the whole program), tap Print this section only beside the section heading.
  • Clear entries wipes every entry in the open record. Use it only to start that record again.

Other Options

  • Word: download the editable Word version to change content or print blank copies.
  • Fillable PDF: download for offline use in Adobe Reader or on a tablet with no signal. The app needs an internet connection to save records, so use the fillable PDF where there is no coverage and save it under the naming rule above.
  • Managers: use Accounts to add assessors, change a user's role (Manager, Assessor or Training Compliance), reset passwords and switch accounts off. Use Records to review and reopen completed VOCs.
  • Training Compliance accounts can view all drivers, records and results for their fleet, add drivers, print or save PDFs, and export the record list. They cannot start, edit, reopen or delete VOCs or manage users.
  • To export the record list, tap Records > All records > Export list (CSV). It opens in Excel.
  • Guide: this How to Use guide is also available as a PDF and Word file. Tap Guide PDF or Guide Word at the top of this page.
  • Administrators can delete a user from Accounts. The person can no longer sign in, but their VOC records and training history are kept and show them as a former user.

Good Practice

  • Complete the VOC during or straight after the assessment, never later from memory.
  • Never pre-fill ratings or sign off items you did not observe.
  • Do not use the app while driving. Complete it only when parked safely.
  • Report problems with the app or content to the Lead Trainer.

WA Compliance References

Each program includes a WA Compliance References table at the end. Check the links at each annual review.

Driver Trainer Program and VOC

WordFillable PDF

1. Purpose

This program gets every Driver Trainer to train, coach and assess new drivers the same way. The goal is that a new driver trained by any trainer, on any run, reaches the same standard and is assessed against the same criteria.

2. Scope

Applies to every employee appointed or acting as a Driver Trainer, Buddy Driver or Driver Assessor for rigid, semi, B-double, and double/triple/quad road-train (MC) combinations.

3. Trainer Entry Requirements

RequirementEvidence
Current MC licence (or class trained), clean record for the last 3 years with no major offencesLicence check and traffic history
Minimum 3 years' experience in the combinations they will train onWork history and supervisor sign-off
Company Driver VOC passed at "Competent" in the last 12 monthsVOC record
No at-fault serious incidents in the last 24 monthsIncident register
Fit for work, current medical if required by site/clientMedical certificate
Recommended: TAESS00019 Assessor Skill Set or Cert IV TAE (required for anyone signing off final assessments)Certificate
Good communication, patience, positive safety attitudeInterview and reference from Operations Manager

4. Program Structure

ModuleDeliveryDuration
M1 Role, standards and responsibilities of the TrainerClassroom2 hrs
M2 Company Driving Standard (the "one way")Classroom and yard4 hrs
M3 How adults learn and coaching techniqueClassroom and role-play3 hrs
M4 Structured on-road instruction (commentary, demonstrate, practise, feedback)Yard and on-road4 hrs
M5 Assessment principles and using the Driver VOCClassroom3 hrs
M6 Feedback, difficult conversations and managing unsafe traineesRole-play2 hrs
M7 Records, documentation and reportingClassroom1.5 hrs
M8 Calibration assessments (moderation)On-road, paired with Lead Trainer1 day
M9 Supervised practice: train one new driver under observationOn the job1 to 2 shifts
Final: Trainer VOCOn-road and classroomHalf day

Total: about 3 days plus supervised practice.

5. Module Content

M1 Role, standards and responsibilities

  • The trainer is a role model on every shift, not only when training.
  • Duty of care under the WA Work Health and Safety Act 2020 and company policy; Chain of Responsibility principles (everyone who influences the task shares responsibility for safety).
  • Fatigue management obligations under WHS (General) Regulations 2022 (WA), the WorkSafe WA Code of Practice, WAHVA fatigue standards and the company driver fatigue management plan.
  • Authority to stop training, stop the vehicle or remove a trainee from driving when safety is at risk.
  • Confidentiality and fairness: no favouritism, no "short cuts" signed off.

M2 Company Driving Standard

Every trainer must demonstrate, explain and assess these items the same way:

  • Fitness for duty check and fatigue record
  • Pre-start / daily inspection sequence (walk-around order, defect reporting)
  • Coupling and uncoupling: prime mover to trailer, dollies, converter, road-train combinations; tug test and visual check
  • Load restraint checks (Load Restraint Guide), mass and dimension awareness
  • Mirrors, observation and 360-degree awareness
  • Moving off, gear selection, progressive shifting, engine brake and retarder use
  • Speed and space management: following distances for combination length, gap selection
  • Intersections, roundabouts, rail crossings, turning paths and off-tracking
  • Hill work: descending in the correct gear, brake fade prevention
  • Reversing: get out and look (GOAL), spotter use, blind-side reversing
  • Road-train specifics: approved routes (RAV network), breakdown procedure, overtaking behaviour, dust and gravel roads, stopping on shoulders
  • Emergency procedures: brake failure, tyre blowout, fire, trailer sway, animal strike
  • Communication: UHF protocol, calling ahead, dispatcher contact
  • Site rules: speed, PPE, exclusion zones, load and unload procedures
  • End-of-shift: parking, securing, post-trip defects, paperwork

Trainers must use the same terminology and the same checklist every time.

M3 How adults learn

  • Adults learn by doing, need to know "why", and bring experience that must be respected.
  • Tell, Show, Do, Review method.
  • Chunking: one skill at a time, build up.
  • Checking understanding with open questions ("What would you do if...?") rather than "Got it?".
  • Adjusting for literacy, language and nerves.

M4 Structured on-road instruction

  • Plan the route to suit the trainee's stage.
  • Commentary driving: trainer drives and talks through what they see and do.
  • Reverse commentary: trainee drives and talks through.
  • Intervention levels: 1 prompt, 2 instruct, 3 take control / stop the vehicle.
  • Never coach during complex manoeuvres; debrief once parked.

M5 Assessment principles

  • Rules of evidence: valid, sufficient, authentic, current.
  • Principles of assessment: fair, flexible, valid, reliable.
  • Assess against the criteria only, not "how I do it".
  • Rating scale used company-wide:
  • C = Competent, performs safely and consistently without prompting
  • F (Fair) = meets the basics, needs coaching
  • P (Poor) = Not Yet Competent, needs more training
  • CF = Critical Fail, unsafe act, stops the assessment
  • Critical fail items are the same for all trainers (see Driver VOC).

M6 Feedback and difficult conversations

  • Feedback model: what I saw, the effect/risk, what good looks like, agree next step.
  • Positive to correction ratio; be specific.
  • Managing a trainee who is unsafe, argumentative or not progressing: document, escalate to Lead Trainer.

M7 Records

  • Daily Training Log completed each shift, signed by trainer and trainee.
  • Assessments recorded the same day; no back-dating.
  • Incidents and near misses reported the same shift.
  • Records stored in the training folder for at least 7 years.

M8 Calibration (moderation)

  • Trainer and Lead Trainer assess the same driver at the same time, independently.
  • Compare results item by item. Target: at least 90% agreement, and 100% agreement on critical items.
  • Repeated every 6 months for all trainers to keep standards aligned.

6. Driver Trainer VOC Fillable

Trainer name: Employee no: Date:

Assessor (Lead Trainer): Vehicle/combination:

Rating: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Root cause (RCA column)
CodeRoot causeWhat it means
PPlanningDid not plan the route, approach or manoeuvre in advance. Late decisions, no contingency.
OObservationDid not check mirrors, blind spots or surroundings, or identify hazards. Poor scanning.
TTechniqueIncorrect physical execution: steering, braking, gear selection, speed control, positioning.
VKVehicle KnowledgeNot enough understanding of vehicle systems, couplings, braking systems or controls.
JJudgment / CompliancePoor gap selection, misjudged speed or distance, or a breach of road law or safety rules.
CMCommunicationDid not signal, verbalise checks or communicate intent clearly.

RCA column: each item has its most likely root cause code. In the app the code appears once C, F or P is ticked and is coloured by the rating: green for C, orange for F and red for P. Change the code if a different cause applies.

F and P items, with their root cause, appear on the Competency and Compliance Dashboard for managers to follow up, record the action taken and verify.

Part A: Knowledge (verbal or written, minimum 80%. Any gap on a critical question must be discussed and resolved before sign-off)

#QuestionCFPN/ARCA
A1Explain your legal and company responsibilities as a Driver Trainer
A2Explain the fatigue requirements that apply to our drivers
A3State the company critical-fail items for a new driver (critical)
A4Explain the three intervention levels and when to take control (critical)
A5Explain the rating scale and what "Competent" means
A6Describe the four principles of assessment and four rules of evidence
A7Describe the process when a trainee is not progressing
A8Describe what records you must complete and when
A9Explain the RAV network and how to check an approved route
A10Explain the incident and near-miss reporting process

Part B: Own driving standard (observed)

#CriteriaCFPN/ARCA
B1Completes pre-start in the company sequence
B2Couples/uncouples to standard, including tug test and visual check
B3Drives to the Company Driving Standard throughout
B4Demonstrates correct reversing and GOAL

Part C: Instruction (observed while training a driver or role-play)

#CriteriaCFPN/ARCA
C1Plans the session: goal, route, and the trainee's stage
C2Briefs the trainee on the session and safety rules
C3Uses Tell, Show, Do, Review
C4Gives clear commentary drive
C5Uses standard company terminology
C6Checks understanding with open questions
C7Uses intervention levels correctly and at the right time
C8Does not overload trainee during complex manoeuvres
C9Gives specific, balanced feedback in the debrief
C10Agrees next steps with trainee

Part D: Assessment (calibration against Lead Trainer)

#CriteriaCFPN/ARCA
D1Uses the Driver VOC form correctly
D2Ratings match Lead Trainer on at least 90% of items
D3Identifies 100% of critical-fail items observed
D4Writes clear, factual evidence comments
D5Delivers result to trainee fairly and explains next steps

Part E: Records

#CriteriaCFPN/ARCA
E1Daily Training Log complete, accurate and signed
E2Records filed correctly and on time

Outcome

Competent: approved as Driver Trainer for: (combinations)

Not Yet Competent: further training required in:

Re-assessment date:

Assessor signature: Trainer signature:

Operations Manager approval: Date:

Reassessment: every 12 months, with calibration every 6 months.

7. Ongoing Standards

  • Trainer meeting every quarter: review incidents, feedback, any drift from standard.
  • Trainee feedback survey after each program; results reviewed with each trainer.
  • Any trainer involved in an at-fault serious incident is stood down from training until reassessed.

WA Compliance References

Checked September 2026. Always confirm the current version at the link before relying on it.

AreaReferenceWhere to find it
Work health and safety dutiesWork Health and Safety Act 2020 (WA)legislation.wa.gov.au
Commercial vehicle driver fatigueWork Health and Safety (General) Regulations 2022 (WA), including reg. 184D and the requirement for a driver fatigue management planlegislation.wa.gov.au
Fatigue codeWorkSafe WA, Fatigue Management for Commercial Vehicle Drivers: Code of Practiceworksafe.wa.gov.au/publications/code-practice-fatigue-management-commercial-vehicle-drivers
Fatigue guidance and FAQsWorkSafe WA, Fatigue management for commercial vehicle drivers (1300 307 877)worksafe.wa.gov.au/fatigue-management-commercial-vehicle-drivers
Chain of ResponsibilityRoad Traffic (Administration) Act 2008 and Road Traffic (Vehicles) Act 2012 (WA). WA does not apply the Heavy Vehicle National Lawmainroads.wa.gov.au/heavy-vehicles/compliance-enforcement/chain-of-responsibility
Heavy vehicle accreditationMain Roads WA, WA Heavy Vehicle Accreditation (WAHVA) Management Systems Standards, including fatigue management. Required for B-double and road-train operatorsmainroads.wa.gov.au/heavy-vehicles/accreditation-auditing/wa-heavy-vehicle-accreditation
Road-train routes (RAV)Main Roads WA, Restricted Access Vehicle networks and Road Train Domain. RAVs are combinations over 19 m long or 42.5 t gross massmainroads.wa.gov.au/road-train-domain
Load restraintNational Transport Commission, Load Restraint Guide 2018 (updated design 2024)ntc.gov.au/codes-and-guidelines
MC licenceDepartment of Transport WA: MC practical assessments are done only through an approved RTO. Internal VOCs do not replace licence assessmenttransport.wa.gov.au/licensing/drivers-licence/get-a-licence/multi-combination
Trainer and assessor qualificationsTAE40122 Certificate IV in Training and Assessment or TAESS00019 Assessor Skill Set (training.gov.au)training.gov.au

New Employee Driver Program and VOC

WordFillable PDF

1. Purpose

A structured, consistent pathway taking a newly hired driver from induction to working on their own, assessed against the same standard by every trainer.

2. Entry Requirements

  • Licence class for the vehicle or combination (C, LR, MR, HR, HC or MC), checked and copied
  • Passenger Transport Driver (PTD) authorisation where a mini bus or coach is driven for hire or reward
  • Traffic history checked
  • Pre-employment medical and drug and alcohol test passed
  • Company induction completed
  • Site/client inductions as required

3. Program Stages

StageFocusTypical durationSign-off to progress
1 InductionPolicies, fatigue, WHS, D&A, incident reporting, site rules, systems (telematics, paperwork)1 dayInduction checklist
2 Yard and equipmentPre-start, controls, coupling/uncoupling, load restraint, reversing in the yard1 to 2 daysStage 2 checklist
3 Observation rideTrainee rides with trainer; commentary driving on the real run1 to 2 shiftsTrainer log
4 Supervised drivingTrainee drives, trainer coaches; builds from single trailer to full combination and full run5 to 15 shifts (experience-based)Daily logs show progress on all items
5 Driver VOCFormal assessment by a different approved trainer where possible1 shiftVOC "Competent"
6 Solo with follow-upDrives solo; check-ins at 1 week, 1 month, 3 months3 monthsFollow-up ride at 3 months

Duration is based on competence, not time. Experienced drivers may move faster; nobody skips the VOC.

4. Training Content (by topic)

  • Fitness for duty, fatigue rules, work diary / records
  • Pre-start and defect reporting
  • Cabin controls, gauges, transmission, engine brake/retarder, EBS/ABS alerts
  • Coupling and uncoupling (all configurations the driver will operate)
  • Load restraint, mass, dimension and route (RAV) awareness
  • Observation and mirrors
  • Speed and space management
  • Intersections, roundabouts, rail crossings, turning and off-tracking
  • Hill work and braking
  • Reversing and GOAL
  • Road-train driving: overtaking, being overtaken, gravel, dust, wildlife, shoulders
  • Emergency and breakdown procedures, triangles/warning devices
  • UHF and communications
  • Site procedures: loading, unloading, exclusion zones, PPE
  • Fuel efficiency and vehicle care
  • End-of-shift and paperwork

5. Daily Training Log (one per shift) Fillable

Date: Trainee: Trainer: Vehicle/combination: Route:

Topic practisedRating (1 Shown, 2 With help, 3 Prompted, 4 Independent)Comments

Main strength today:

Focus for next shift:

Any safety concerns: No Yes (report to Lead Trainer)

Trainer signature: Trainee signature:

6. New Driver VOC Fillable

Driver name: Employee no: Licence class/no: Expiry:

Vehicles / configurations assessed: (tick each vehicle or combination driven during this VOC; shown on the Competency Matrix)

Light vehicle, mini bus or coach: use this same VOC and mark any item that does not apply to the vehicle (for example coupling, trailer and road-train items) N/A.

Assessor: Date: Vehicle/combination: Rego:

Route: Weather/road conditions:

Type: Initial Annual Post-incident New combination

Rating: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | CF = Critical Fail | N/A = Not applicable

Root cause (RCA column)
CodeRoot causeWhat it means
PPlanningDid not plan the route, approach or manoeuvre in advance. Late decisions, no contingency.
OObservationDid not check mirrors, blind spots or surroundings, or identify hazards. Poor scanning.
TTechniqueIncorrect physical execution: steering, braking, gear selection, speed control, positioning.
VKVehicle KnowledgeNot enough understanding of vehicle systems, couplings, braking systems or controls.
JJudgment / CompliancePoor gap selection, misjudged speed or distance, or a breach of road law or safety rules.
CMCommunicationDid not signal, verbalise checks or communicate intent clearly.

RCA column: each item has its most likely root cause code. In the app the code appears once C, F or P is ticked and is coloured by the rating: green for C, orange for F and red for P. Change the code if a different cause applies.

F and P items, with their root cause, appear on the Competency and Compliance Dashboard for managers to follow up, record the action taken and verify.

Critical-fail items (any one ends the assessment and the result is Not Yet Competent)

  • Running a red light or stop sign, or failing to give way causing another road user to react
  • Excessive speed for the conditions or over the limit
  • Unsecured or unsafe load, or incorrect coupling not detected (fails tug test / visual check)
  • Unsafe reversing without checking or using a spotter where required
  • Assessor has to take physical or verbal control to avoid an incident
  • Using a mobile phone while driving
  • Driving while fatigued or impaired, or breaching fatigue rules
  • Contact with an object, vehicle or person

Critical fail observed: No Yes:

Section 1: Pre-trip

#CriteriaCFPN/ARCA
1.1Fit for duty, fatigue record correct
1.2Licence and documents carried
1.3Walk-around in company sequence: tyres, wheels, lights, air/electrics, suspension, fifth wheel, leaks
1.4In-cab checks: gauges, air build-up, brakes, horn, wipers, mirrors, seat belt
1.5Defects recorded and reported correctly
1.6Checks load restraint, mass and dimensions

Section 1B: Mid-trip inspection

Checked at a planned stop during the trip, across the complete combination. Hub and brake temperatures are checked by hand or with a heat gun.

#CriteriaCFPN/ARCA
1B.1Vehicle posture and suspension, every unit
1B.2Leaks: air, oil, fuel, coolant
1B.3Wheels, nuts and tyres
1B.4Mudflaps and mudguards
1B.5Lights and indicators
1B.6Mandatory signage and number plates
1B.7Couplings, turntables, dollies and safety chains
1B.8Tools, bars, ropes and chains secure
1B.9Vision and cab cleanliness
1B.10Hub and brake temperatures checked
1B.11Load security and restraint
1B.12Brakes

Section 2: Coupling and uncoupling

#CriteriaCFPN/ARCA
2.1Checks area, trailer height and chocks
2.2Couples prime mover to trailer correctly
2.3Connects/couples dolly and converter correctly (road train)
2.4Tug test and visual check of jaws/pin/locking
2.5Airlines, electrics, landing legs, safety chains correct
2.6Uncouples safely in correct sequence

Section 3: On-road driving

#CriteriaCFPN/ARCA
3.1Moves off safely: mirrors, signals, gear selection
3.2Smooth, progressive gear changes and engine management
3.3Regular mirror scanning and observation
3.4Speed suits limits, load and conditions
3.5Keeps safe following distance for combination
3.6Lane position and correct road position for turns
3.7Intersections and roundabouts: approach, gap selection, off-tracking
3.8Rail crossings handled correctly
3.9Correct use of engine brake/retarder, hill descent in correct gear
3.10Anticipates hazards and other road users
3.11Overtaking and being overtaken (road-train etiquette, UHF)
3.12Gravel/unsealed roads, dust, wildlife awareness
3.13Follows approved route (RAV)
3.14Safe stopping and parking, shoulders and rest areas
3.15All passengers seated, seat belts secured

Section 4: Reversing and manoeuvring

#CriteriaCFPN/ARCA
4.1Gets out and looks (GOAL) before reversing
4.2Uses spotter correctly where required
4.3Reverses accurately into bay/dock
4.4Tight manoeuvring without contact

Section 5: Site and load

#CriteriaCFPN/ARCA
5.1Follows site rules, speed and PPE
5.2Stays in safe zones during load/unload
5.3Checks restraint after loading and during trip

Section 6: Knowledge (verbal questions)

#QuestionCFPN/ARCA
6.1What are your fatigue limits and rest requirements?
6.2What do you do if you find a defect before or during a trip?
6.3What is the breakdown procedure for a road train?
6.4What would you do if brakes started to fade on a descent?
6.5How and when do you report an incident or near miss?
6.6How do you check your route is approved for this combination?

Section 7: End of shift

#CriteriaCFPN/ARCA
7.1Parks and secures vehicle correctly
7.2Post-trip check and defect report
7.3Paperwork/records complete and accurate

Assessor comments (evidence)

Outcome

Competent: approved to drive solo on: (combinations/routes)

Not Yet Competent: further training in: Re-assessment date:

Critical Fail: stood down from driving, retraining plan required

Assessor signature: Driver signature:

Operations Manager approval: Date:

Reassessment

  • Annually for all drivers
  • After any at-fault incident
  • Before operating a new combination type
  • Where telematics or complaints show a concern

7. Follow-up After Solo Sign-off Fillable

CheckDateByNotes
1 week phone or yard check-in
1 month check (telematics review)
3 month follow-up ride

WA Compliance References

Checked September 2026. Always confirm the current version at the link before relying on it.

AreaReferenceWhere to find it
Work health and safety dutiesWork Health and Safety Act 2020 (WA)legislation.wa.gov.au
Commercial vehicle driver fatigueWork Health and Safety (General) Regulations 2022 (WA), including reg. 184D and the requirement for a driver fatigue management planlegislation.wa.gov.au
Fatigue codeWorkSafe WA, Fatigue Management for Commercial Vehicle Drivers: Code of Practiceworksafe.wa.gov.au/publications/code-practice-fatigue-management-commercial-vehicle-drivers
Fatigue guidance and FAQsWorkSafe WA, Fatigue management for commercial vehicle drivers (1300 307 877)worksafe.wa.gov.au/fatigue-management-commercial-vehicle-drivers
Chain of ResponsibilityRoad Traffic (Administration) Act 2008 and Road Traffic (Vehicles) Act 2012 (WA). WA does not apply the Heavy Vehicle National Lawmainroads.wa.gov.au/heavy-vehicles/compliance-enforcement/chain-of-responsibility
Heavy vehicle accreditationMain Roads WA, WA Heavy Vehicle Accreditation (WAHVA) Management Systems Standards, including fatigue management. Required for B-double and road-train operatorsmainroads.wa.gov.au/heavy-vehicles/accreditation-auditing/wa-heavy-vehicle-accreditation
Road-train routes (RAV)Main Roads WA, Restricted Access Vehicle networks and Road Train Domain. RAVs are combinations over 19 m long or 42.5 t gross massmainroads.wa.gov.au/road-train-domain
Load restraintNational Transport Commission, Load Restraint Guide 2018 (updated design 2024)ntc.gov.au/codes-and-guidelines
MC licenceDepartment of Transport WA: MC practical assessments are done only through an approved RTO. Internal VOCs do not replace licence assessmenttransport.wa.gov.au/licensing/drivers-licence/get-a-licence/multi-combination
Light vehicle and bus licencesDepartment of Transport WA licence classes: C for light vehicles; LR for a bus carrying more than 12 people (including the driver) up to 8,000 kg GVM; MR for a 2-axle bus over 8,000 kg; HR for a 3-axle or larger bus over 8,000 kgtransport.wa.gov.au
Passenger transportDepartment of Transport WA: Passenger Transport Driver (PTD) authorisation is needed when driving a mini bus or coach for hire or reward (for example a contracted bus service)transport.wa.gov.au
Trainer and assessor qualificationsTAE40122 Certificate IV in Training and Assessment or TAESS00019 Assessor Skill Set (training.gov.au)training.gov.au
Saved