Getting Started
- Open integrateddriversolutions.com/operator in Chrome (Android) or Safari (iPhone/iPad) and sign in with the email and password from your site manager or Integrated Operator Solutions.
- Change your temporary password straight away under Account (or Accounts for managers) > Change my password.
- You stay signed in on that device for 14 days. On a shared tablet, tap Sign out at the end of your shift.
- Set up in both apps with the same email and password? Signing in here also signs you in to Driver Training, so you can switch with the button at the top without signing in again. Sign out signs you out of both.
- Managers and Training Compliance staff can tap Dashboard → in the menu, under Home, to open the Dashboard without signing in again.
- To install the app on a phone or tablet: on the home page (integrateddriversolutions.com) tap Download The App, then Install IDS. If there is no Install button on Android (Chrome), open the three-dot menu and tap Install app / Add to Home screen. On iPhone or iPad, open the home page in Safari, tap Share, then Add to Home Screen. IDS is one app for Driver Training, Plant Training and the Dashboard.
- Open IDS from the new home-screen icon. It opens on the home page; tap Plant Training and sign in once. The installed app keeps you signed in for 14 days, the same as the browser.
- Use the left-hand menu to choose a program. On a phone, tap Menu at the top.
Programs in the App
- Mobile Plant Program: haul trucks, excavators, dozers, loaders, graders, water carts, mobile and slewing cranes, IT tool carriers, telehandlers, forklifts, backhoes, skid steers, drill rigs, scrapers, rollers, service trucks and tyre handlers. Light vehicles, mini buses and coaches are assessed in the Driver Training app. Contains the Daily Training Log, Mobile Plant VOC and follow-up table.
- Fixed Plant Program: crushers, conveyors, screens, mills, stackers, reclaimers, loaders, feeders, overhead cranes, pressure equipment, processing, tailings and water pumps, control rooms and confined space entry. Contains the Daily Training Log, Fixed Plant VOC and follow-up table.
- Plant Trainer and Assessor Standard: aligns all plant trainers and assessors to one standard. Contains the Trainer VOC.
- Sections marked Fillable can be completed on screen.
Completing a VOC on Screen
- Tap Records, find or add the operator, then tap Mobile Plant VOC, Fixed Plant VOC or Trainer VOC. The VOC opens and the bar at the top shows the operator, VOC type, Draft or Complete, and how many items are rated.
- Type the equipment, fleet number and area in the shaded fields.
- Check the critical-fail list first. If any critical fail occurs, stop the assessment, make the plant safe and record it.
- Tick C (Competent), F (Fair, needs coaching), P (Poor, Not Yet Competent) or N/A (Not applicable) for each item. A ticked F box turns orange and a ticked P box shows a red X. Only one box can be ticked per row.
- Choose the equipment type (Mobile Plant) or plant area (Fixed Plant) first. The VOC then shows only the general sections and the section for that equipment or area; the other equipment sections stay hidden and are not counted. Tick Show all sections to see every section, for example when one VOC covers more than one machine.
- Write factual evidence in the comments fields (what you saw, where, when).
- The progress bar under each VOC heading shows how many items are rated and the overall result.
Root Cause (RCA) Column
- Each VOC item has an RCA box beside N/A. When you tick C, F or P, it fills in with the most likely root cause for that item.
- The codes are: P Planning, O Observation, T Technique, VK Vehicle Knowledge (machine and plant systems, controls, safety devices and hazards), J Judgment / Compliance, CM Communication.
- The box is coloured by the rating: green for C, orange for F and red for P. Ticking N/A leaves it blank.
- If a different cause applies, tap the box and choose another code. The Root cause legend above Section 1 of each VOC explains every code.
- The progress bar shows when every F and P item has a root cause recorded.
- When the VOC is marked complete, each F and P item and its root cause appears under Corrective actions on the Competency and Compliance Dashboard. A manager records the action taken and marks it completed, then a different person verifies and closes it.
- On the Word or fillable PDF version, the RCA column is pre-filled with the same codes. Use the Root cause and corrective action record table under the legend to write the action, owner and due date.
Saving and Keeping Records
- Every tick and entry saves automatically to your company's secure records a moment after you make it. A Saved message appears in the corner.
- Entries only save while a record is open. If the top bar says No record open, start or open a record first.
- When the assessment is finished, tap Mark complete. The record is locked and the result is recorded. If a VOC was interrupted (for example a breakdown) and marked complete before every item was rated, the assessor who started it can tap Reopen to finish it. A VOC with every item rated can only be reopened by a site manager. If you just need a break, you don't need to mark it complete: close the record and it stays in progress.
- Tap Close record before starting the next person.
- To find a past VOC, tap Records > All records and search by operator name or employee number. Tap an operator's name to see their full history.
- For a copy, open the record, tap Print / Save PDF. Name the file: Surname_FirstName_VOC-Type_Equipment_YYYY-MM-DD.pdf.
- To print only the VOC, tap Print this section only beside the heading.
Other Options
- Word: download the editable Word version of any program to change content or print blank copies.
- Fillable PDF: the app needs an internet connection to save records, so use the fillable PDF where there is no coverage and save it under the naming rule above.
- Managers: use Accounts to add assessors, change a user's role (Manager, Assessor or Training Compliance), reset passwords and switch accounts off, and Records to review and reopen completed VOCs. Training Compliance accounts can view records and add operators, but cannot start or change VOCs.
- Guide: this How to Use guide is also available as a PDF and Word file.
Good Practice
- Complete the VOC during or straight after the assessment, never later from memory.
- Never pre-fill ratings or sign off items you did not observe.
- Do not use the app while operating plant. Park up in a safe location first.
- Assess on the actual site equipment and in the actual work area wherever possible.
WA Compliance References
- Work Health and Safety Act 2020 (WA)
- Work Health and Safety (Mines) Regulations 2022 (WA): principal mining hazard management, mobile plant, isolation, competency and training records
- WorkSafe WA Mines Safety codes of practice and guidance (for example mobile plant, cranes, traffic management, fatigue, isolation, confined spaces and working at heights)
- Site Safety Management System, Traffic Management Plan and OEM operator manuals
- High risk work licences for cranes and AS 2550 (cranes); AS 2865 (confined spaces)
- Department of Transport WA: HR licence class for haul trucks and articulated dump trucks
- Nationally recognised RII (Resources and Infrastructure) units for plant operations. Check current unit codes on training.gov.au before mapping VOCs to units
- Keep training and VOC records for the life of employment and as required by the mine's record-keeping procedure
1. Purpose
To provide a consistent, site-based training and verification of competency (VOC) process for mobile plant operators so every operator is trained, assessed and authorised to one standard.
2. Scope
- Haul trucks (rigid and articulated)
- Excavators and shovels
- Dozers (track and wheel)
- Wheel loaders
- Graders
- Water carts
- Mobile cranes (non-slewing / pick and carry)
- Slewing mobile cranes (all-terrain, crawler and truck-mounted)
- Integrated tool carriers and telehandlers
- Forklifts
- Backhoes and skid steer loaders
- Drill rigs (production and exploration)
- Scrapers and compactors / rollers
- Service, fuel and lube trucks
- Tyre handlers
- Other mobile plant listed on the site authorisation matrix
3. Entry Requirements
- Site induction completed
- Current licence of the class required for the equipment or site (for example HR or higher for haul trucks and articulated dump trucks)
- Haul truck and articulated dump truck operators: current HR (Heavy Rigid) licence or higher, required on all WA mine sites
- Crane operators: current high risk work licence for the crane class
- Fitness for work medical and drug and alcohol clearance
- Relevant nationally recognised unit or prior experience evidence (for RPL)
- Supervisor nomination for the equipment type
4. Program Stages
| Stage | Activity | Minimum |
|---|---|---|
| 1 | Theory: OEM manual, site rules, TMP, hazards | 1 shift |
| 2 | Static familiarisation and pre-start with trainer | 1 shift |
| 3 | Supervised operation in low-risk area | 3 to 5 shifts |
| 4 | Supervised operation in production | 5 to 10 shifts or as required |
| 5 | VOC by an approved assessor | 1 assessment |
| 6 | Authorisation and follow-up checks | Weeks 1 and 4, months 3 and 6 |
Hours are a guide. Progress is based on competence, not time.
5. Training Content (by topic)
- Site rules, Traffic Management Plan, road design and right-of-way
- Fitness for work, fatigue and shift change hazards
- OEM controls, alarms, fire suppression and emergency stops
- Pre-start inspection and defect reporting
- Loading, hauling, dumping and bench/face operations
- Collision avoidance, proximity detection and blind spots
- Isolation, tag-out and working near maintenance crews
- Emergency response: fire, rollover, tyre fire, power lines
- Cranes: load charts, lift planning, set-up, rigging awareness and communication with dogman (high risk work licence required)
6. Daily Training Log (one per shift) Fillable
Trainee name: Employee no: Trainer:
| Day | Date | Equipment / area | Tasks covered | Hours | Trainer comments |
|---|---|---|---|---|---|
| 1 | |||||
| 2 | |||||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 7 |
Trainer signature: Trainee signature:
7. Mobile Plant VOC Fillable
Operator name: Employee no: Site authorisation no:
Assessor: Date: Equipment type: Fleet no:
Area / pit: Shift and conditions:
HR licence no: Expiry: Sighted N/A (HR licence not required for this equipment or site)
Type: Initial Annual Post-incident New equipment type Return to work
Rating key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | CF = Critical Fail | N/A = Not applicable
Critical-fail items (any one ends the assessment and the result is Not Yet Competent)
- Speeding or failing to follow the Traffic Management Plan
- Failing to give way or positive communication, causing another operator to react
- Unsafe proximity to edge, crest, windrow or unstable ground
- Contact with any person, vehicle, structure or plant
- Operating with a known critical defect (brakes, steering, fire suppression)
- Leaving the cab in an exclusion zone or while plant is not secured
- Using a mobile phone while operating
- Assessor has to take control or stop the operation to prevent an incident
- Operating while fatigued or impaired
- Crane: lifting over people, exceeding the load chart, overriding the load moment indicator, or breaching power line clearances
- Drill rig: entering the rotating-parts exclusion zone while the rig is live
- Forklift / telehandler: raising or travelling with a load over people
Critical fail observed: No Yes:
Root cause (RCA column)
| Code | Root cause | What it means |
|---|---|---|
| P | Planning | Did not plan the task, set-up, travel path or lift in advance. Late decisions, no contingency. |
| O | Observation | Did not check the machine, work area, people or hazards. Poor scanning or monitoring. |
| T | Technique | Incorrect physical operation: controls, positioning, speed, procedure steps. |
| VK | Vehicle Knowledge | Not enough understanding of the machine or plant: systems, controls, safety devices, hazards and emergency equipment. |
| J | Judgment / Compliance | Poor judgment of distance, speed, ground or limits, or a breach of site rules, permits or licensing. |
| CM | Communication | Did not use radio, hand signals or positive communication, or did not report or record clearly. |
RCA column: each item has its most likely root cause code. The code appears once C, F or P is ticked and is coloured by the rating: green for C, orange for F and red for P. Change the code if a different cause applies.
F and P items, with their root cause, appear on the Competency and Compliance Dashboard for managers to follow up, record the action taken and verify.
Section 1: Fitness for work and pre-start
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 1.1 | Fit for work: fatigue, alcohol and drug requirements met, correct PPE worn | |||||
| 1.2 | Holds site authorisation / permit for the equipment | |||||
| 1.3 | Walk-around in OEM sequence: tyres/tracks, hydraulics, leaks, guards, lights, fire suppression, access systems | |||||
| 1.4 | Fluid levels checked (engine, hydraulic, coolant, fuel) | |||||
| 1.5 | In-cab checks: gauges, brakes, steering, horn, reversing alarm, camera/proximity detection, seat belt, radio | |||||
| 1.6 | Defects recorded on pre-start and reported; tagged out if unsafe | |||||
| 1.7 | Uses three points of contact on access and egress |
Comments / evidence:
Section 2: General operation and traffic management
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 2.1 | Radio communications clear, correct channel and call signs | |||||
| 2.2 | Follows Traffic Management Plan, road rules and site speed limits | |||||
| 2.3 | Maintains safe following distance and correct right-of-way at intersections | |||||
| 2.4 | Correct positive communication before approaching or passing other plant and light vehicles | |||||
| 2.5 | Adjusts operation for road conditions, dust, wet, night and gradients | |||||
| 2.6 | Correct use of retarder / engine brake and gears on grade | |||||
| 2.7 | Parks correctly: park brake, bucket/blade grounded, chocked or on windrow as required | |||||
| 2.8 | Correct shutdown, isolation and cool-down procedure |
Comments / evidence:
Section 3A: Haul truck (rigid or articulated)
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3A.1 | Holds a current HR (Heavy Rigid) licence or higher, required for all haul trucks and articulated dump trucks on WA mine sites, plus site authorisation for the truck model (tick N/A if an HR licence is not required) | |||||
| 3A.2 | Correct queueing, spotting and reversing to loading unit | |||||
| 3A.3 | Loads under instruction from loader operator; stays in cab | |||||
| 3A.4 | Maintains safe position on dump / tip head; uses windrow as a marker, not a stop | |||||
| 3A.5 | Checks for underfoot hazards and edges before tipping | |||||
| 3A.6 | Lowers tray fully before moving off | |||||
| 3A.7 | Monitors payload, tyre temperatures and alarms |
Comments / evidence:
Section 3B: Excavator
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3B.1 | Correct bench set-up: floor level, stable, track position with final drives to rear | |||||
| 3B.2 | Controlled digging and loading, no swinging over cabs | |||||
| 3B.3 | Communicates positioning with truck operators | |||||
| 3B.4 | Maintains safe face height and manages face stability / overhangs | |||||
| 3B.5 | Correct tracking and walking with bucket low |
Comments / evidence:
Section 3C: Dozer
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3C.1 | Pushes and rips safely, maintains control on slopes | |||||
| 3C.2 | Correct edge work and windrow construction to site standard | |||||
| 3C.3 | Maintains visibility, spotter used where required | |||||
| 3C.4 | Correct walking and parking with blade and ripper grounded |
Comments / evidence:
Section 3D: Wheel loader
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3D.1 | Loads trucks evenly and within payload | |||||
| 3D.2 | Maintains stable stockpile / face | |||||
| 3D.3 | Correct bucket height when travelling | |||||
| 3D.4 | Correct hand signals or radio when loading |
Comments / evidence:
Section 3E: Grader
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3E.1 | Maintains road crossfall, drainage and windrow height to spec | |||||
| 3E.2 | Positions safely in traffic with correct communications | |||||
| 3E.3 | Correct blade and articulation control |
Comments / evidence:
Section 3F: Water cart
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3F.1 | Waters to schedule without creating slippery conditions | |||||
| 3F.2 | Keeps off intersections, ramps and braking areas when watering | |||||
| 3F.3 | Correct fill-point procedure |
Comments / evidence:
Section 3G: Mobile crane (non-slewing, e.g. Franna / pick and carry)
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3G.1 | Holds the correct high risk work licence class for the crane | |||||
| 3G.2 | Checks lift plan, load weight, load chart and ground conditions before lifting | |||||
| 3G.3 | Pre-start of hook, block, wire rope / chains, limit switches and load moment indicator | |||||
| 3G.4 | Travels with load low, within the pick and carry chart and site speed limit | |||||
| 3G.5 | Correct communication with dogman / rigger (hand signals or radio) | |||||
| 3G.6 | Keeps exclusion zone clear and never lifts over people | |||||
| 3G.7 | Maintains power line clearances | |||||
| 3G.8 | Stops lifting when wind or visibility is outside limits |
Comments / evidence:
Section 3H: Slewing mobile crane (all-terrain, crawler, truck-mounted)
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3H.1 | Holds the correct high risk work licence class for the crane (slewing class and capacity) | |||||
| 3H.2 | Reviews lift study / lift plan, rigging and load chart for radius and configuration | |||||
| 3H.3 | Correct set-up: level ground, outriggers fully extended on pads / mats, ground bearing checked | |||||
| 3H.4 | Sets and checks load moment indicator and crane configuration settings | |||||
| 3H.5 | Barricades slew radius and tail swing zone | |||||
| 3H.6 | Controlled slewing, hoisting and luffing with smooth load control | |||||
| 3H.7 | Correct use of taglines and communication with dogman / rigger | |||||
| 3H.8 | Maintains power line clearances and monitors wind speed | |||||
| 3H.9 | Correct stowing and travel configuration after lifting |
Comments / evidence:
Section 3I: Integrated tool carrier (IT) and telehandler
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3I.1 | Correct attachment fitted, locked and pin-checked before use | |||||
| 3I.2 | Uses load chart for boom angle, extension and attachment | |||||
| 3I.3 | Stabilisers / outriggers set where required | |||||
| 3I.4 | Travels with load low and tilted back | |||||
| 3I.5 | Never uses the machine as a work platform unless it is rated and fitted with an approved basket |
Comments / evidence:
Section 3J: Forklift
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3J.1 | Holds a forklift high risk work licence (LF) where required | |||||
| 3J.2 | Checks load weight against the data plate | |||||
| 3J.3 | Travels with forks low and load tilted back; reverses when vision is blocked | |||||
| 3J.4 | Keeps pedestrians clear and uses horn at blind corners | |||||
| 3J.5 | Parks with forks lowered, park brake on and key removed |
Comments / evidence:
Section 3K: Backhoe and skid steer loader
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3K.1 | Sets stabilisers before digging (backhoe) | |||||
| 3K.2 | Locates and marks underground services before digging | |||||
| 3K.3 | Maintains safe swing zone and exclusion area | |||||
| 3K.4 | Keeps the bucket low when travelling; stays within rated operating capacity (skid steer) | |||||
| 3K.5 | Uses seat bar / restraint and never leaves controls with attachment raised |
Comments / evidence:
Section 3L: Drill rig (production and exploration)
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3L.1 | Pre-start of mast, rods, hoses, dust suppression and emergency stops | |||||
| 3L.2 | Correct set-up and levelling on pattern, away from crest and open holes | |||||
| 3L.3 | Keeps exclusion zone around rotating parts and never wears loose clothing near them | |||||
| 3L.4 | Correct rod handling and use of rod-handling system | |||||
| 3L.5 | Follows explosives and charging-area rules when working near loaded holes | |||||
| 3L.6 | Correct mast lowering and tramming procedure |
Comments / evidence:
Section 3M: Scraper and compactor / roller
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3M.1 | Maintains safe speed and control when loaded and on grade | |||||
| 3M.2 | Correct cut, load and spread sequence (scraper) | |||||
| 3M.3 | Checks edges and soft ground before compacting | |||||
| 3M.4 | Uses correct vibration settings and stays clear of structures and services (roller) |
Comments / evidence:
Section 3N: Service, fuel and lube truck
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3N.1 | Parks, chocks and isolates the truck at the service bay or go-line | |||||
| 3N.2 | Positive communication with the operator before approaching plant | |||||
| 3N.3 | Correct fuel and lube connection with spill kit ready | |||||
| 3N.4 | Earthing / bonding and no ignition sources during refuelling | |||||
| 3N.5 | Manages hoses and reels to avoid trip and whip hazards |
Comments / evidence:
Section 3O: Tyre handler
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3O.1 | Correct grip, lift and rotation, exclusion zone around tyre work | |||||
| 3O.2 | Follows tyre deflation and handling procedure |
Comments / evidence:
Section 4: Emergency and hazard awareness
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4.1 | Knows emergency procedure, muster point and emergency radio call | |||||
| 4.2 | Knows fire suppression activation and extinguisher use | |||||
| 4.3 | Identifies and reports hazards and near misses | |||||
| 4.4 | Understands power line, geotechnical and unstable ground hazards |
Comments / evidence:
Outcome
Competent Competent, coaching needed Not Yet Competent (re-assess date: )
Restrictions / conditions:
Assessor name: Assessor signature: Operator signature: Date:
8. Follow-up After Authorisation Fillable
| Check | Date | Checked by | Observations | Action required |
|---|---|---|---|---|
| Week 1 | ||||
| Week 4 | ||||
| Month 3 | ||||
| Month 6 |
WA Compliance References
- Work Health and Safety Act 2020 (WA)
- Work Health and Safety (Mines) Regulations 2022 (WA): principal mining hazard management, mobile plant, isolation, competency and training records
- WorkSafe WA Mines Safety codes of practice and guidance (for example mobile plant, cranes, traffic management, fatigue, isolation, confined spaces and working at heights)
- Site Safety Management System, Traffic Management Plan and OEM operator manuals
- High risk work licences for cranes and AS 2550 (cranes); AS 2865 (confined spaces)
- Department of Transport WA: HR licence class for haul trucks and articulated dump trucks
- Nationally recognised RII (Resources and Infrastructure) units for plant operations. Check current unit codes on training.gov.au before mapping VOCs to units
- Keep training and VOC records for the life of employment and as required by the mine's record-keeping procedure
1. Purpose
To provide a consistent training and VOC process for fixed plant operators and maintainers so every person is trained, assessed and authorised to one standard.
2. Scope
- Crushing and screening plant
- Conveyors, feeders and stackers
- Grinding mills, cyclones and thickeners
- Pumps, tanks and reagent systems
- Stackers, reclaimers and ship / train loaders
- Feeders, bins and chutes
- Overhead cranes, hoists and gantries
- Compressors, boilers and pressure equipment
- Filtration, flotation and leach plant
- Water, tailings and dewatering pumps
- Fixed plant control rooms and panels
- Confined spaces: bins, hoppers, chutes, tanks, thickeners, mills and pits
3. Entry Requirements
- Site induction and plant-area induction
- Isolation (lock-out tag-out) training
- Fitness for work medical and drug and alcohol clearance
- Confined space entry training (nationally recognised) for anyone entering or acting as standby
- Working at heights ticket where the role requires it
- Supervisor nomination for the plant area
4. Program Stages
| Stage | Activity | Minimum |
|---|---|---|
| 1 | Theory: process flow, site rules, isolation, hazards | 1 shift |
| 2 | Plant walk-through with trainer | 1 to 2 shifts |
| 3 | Supervised operation and isolations | 5 to 10 shifts |
| 4 | VOC by an approved assessor | 1 assessment |
| 5 | Authorisation and follow-up checks | Weeks 1 and 4, months 3 and 6 |
5. Training Content (by topic)
- Process flow and plant layout
- Permits to work, JHA and Take 5
- Isolation and lock-out tag-out
- Guarding, emergency stops and pull wires
- Blockage clearing and cleanup procedures
- Chemical, dust and noise hazards
- Confined space entry: permits, gas testing, ventilation, standby person and rescue
- Working at heights awareness
- Emergency response and rescue
6. Daily Training Log (one per shift) Fillable
Trainee name: Employee no: Trainer:
| Day | Date | Equipment / area | Tasks covered | Hours | Trainer comments |
|---|---|---|---|---|---|
| 1 | |||||
| 2 | |||||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 7 |
Trainer signature: Trainee signature:
7. Fixed Plant VOC Fillable
Operator name: Employee no: Role:
Assessor: Date: Plant area: Equipment ID:
Type: Initial Annual Post-incident New plant area Return to work
Rating key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | CF = Critical Fail | N/A = Not applicable
Critical-fail items (any one ends the assessment and the result is Not Yet Competent)
- Working on plant without personal isolation and lock applied
- Bypassing or removing a guard or interlock while plant is live
- Reaching into or clearing a blockage on running plant
- Entering a confined space or working at height without the permit
- Failing to test for zero energy
- Assessor has to stop the task to prevent an incident
- Working while fatigued or impaired
- Confined space: entering without a permit, gas test, standby person or rescue plan, or staying in after an alarm
- Pressure equipment: working on a line or vessel that has not been depressurised
- Overhead crane: lifting over people or exceeding rated capacity
Critical fail observed: No Yes:
Root cause (RCA column)
| Code | Root cause | What it means |
|---|---|---|
| P | Planning | Did not plan the task, set-up, travel path or lift in advance. Late decisions, no contingency. |
| O | Observation | Did not check the machine, work area, people or hazards. Poor scanning or monitoring. |
| T | Technique | Incorrect physical operation: controls, positioning, speed, procedure steps. |
| VK | Vehicle Knowledge | Not enough understanding of the machine or plant: systems, controls, safety devices, hazards and emergency equipment. |
| J | Judgment / Compliance | Poor judgment of distance, speed, ground or limits, or a breach of site rules, permits or licensing. |
| CM | Communication | Did not use radio, hand signals or positive communication, or did not report or record clearly. |
RCA column: each item has its most likely root cause code. The code appears once C, F or P is ticked and is coloured by the rating: green for C, orange for F and red for P. Change the code if a different cause applies.
F and P items, with their root cause, appear on the Competency and Compliance Dashboard for managers to follow up, record the action taken and verify.
Section 1: Fitness for work and permits
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 1.1 | Fit for work, correct PPE for the area (including hearing, respiratory and eye protection) | |||||
| 1.2 | Correct work permit obtained and understood (general, hot work, confined space, working at heights) | |||||
| 1.3 | Take 5 / JHA / SWMS completed for the task | |||||
| 1.4 | Knows the plant area layout, emergency stops, pull wires and muster points |
Comments / evidence:
Section 2: Isolation and lock-out
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 2.1 | Identifies all energy sources (electrical, mechanical, hydraulic, pneumatic, gravity, stored) | |||||
| 2.2 | Applies personal lock and danger tag at the correct isolation points | |||||
| 2.3 | Tests for zero energy (try start / test for dead) before work | |||||
| 2.4 | Dissipates or restrains stored energy (belt tension, material in chutes, accumulators) | |||||
| 2.5 | Correct removal of locks and return to service |
Comments / evidence:
Section 3: Conveyors
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3.1 | Inspects belts, idlers, pulleys, skirts and guards only with guards in place or plant isolated | |||||
| 3.2 | Understands pull-wire, belt-drift and zero-speed switches | |||||
| 3.3 | Correct cleanup procedure around conveyors (isolated, no reaching past guards) | |||||
| 3.4 | Identifies and reports spillage, damaged guards and tracking issues |
Comments / evidence:
Section 4: Crushers and screens
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4.1 | Follows start-up and shutdown sequence | |||||
| 4.2 | Correct blockage clearing procedure (isolated, no manual clearing while running) | |||||
| 4.3 | Monitors feed, product size, amps and alarms | |||||
| 4.4 | Recognises signs of wear, vibration and overheating |
Comments / evidence:
Section 5: Processing and pumps (mills, thickeners, tanks)
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 5.1 | Operates from control system / panel correctly | |||||
| 5.2 | Monitors levels, pressures and flows | |||||
| 5.3 | Understands chemical and reagent hazards (SDS) and handles safely | |||||
| 5.4 | Correct response to spills and bunding requirements |
Comments / evidence:
Section 5A: Stackers, reclaimers and ship / train loaders
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 5A.1 | Checks travel path, rail and cable reel before moving | |||||
| 5A.2 | Correct boom, bucket-wheel and slew control within limits | |||||
| 5A.3 | Monitors collision avoidance and anti-collision systems | |||||
| 5A.4 | Follows wind and storm shutdown procedures | |||||
| 5A.5 | Correct communication with control room and port / rail staff |
Comments / evidence:
Section 5B: Feeders, bins and chutes
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 5B.1 | Correct feed rate control and monitoring of levels | |||||
| 5B.2 | Follows hang-up and blockage procedure (no entry, isolate first) | |||||
| 5B.3 | Understands bin and hopper entry is a confined space | |||||
| 5B.4 | Recognises signs of wear and material build-up |
Comments / evidence:
Section 5C: Overhead cranes, hoists and gantries
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 5C.1 | Holds the correct licence where required (for example CB, CN, or site authorisation) | |||||
| 5C.2 | Pre-use check of hook, limits, brakes and pendant / remote | |||||
| 5C.3 | Rated capacity known and not exceeded | |||||
| 5C.4 | Keeps load clear of people and walkways; uses taglines | |||||
| 5C.5 | Correct slinging with a qualified dogman / rigger |
Comments / evidence:
Section 5D: Compressors, boilers and pressure equipment
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 5D.1 | Knows the pressure equipment hazards and relief devices | |||||
| 5D.2 | Checks pressures, temperatures and alarms against limits | |||||
| 5D.3 | Follows start-up, shutdown and blowdown procedures | |||||
| 5D.4 | Isolates and depressurises before any work |
Comments / evidence:
Section 5E: Filtration, flotation and leach plant
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 5E.1 | Monitors reagent dosing and process conditions | |||||
| 5E.2 | Understands cyanide, acid, caustic and other reagent hazards (SDS) where used | |||||
| 5E.3 | Uses gas detectors and PPE correctly in reagent areas | |||||
| 5E.4 | Correct response to leaks, spills and gas alarms |
Comments / evidence:
Section 5F: Water, tailings and dewatering pumps
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 5F.1 | Checks suction, discharge, seals and pipework | |||||
| 5F.2 | Correct priming, start-up and shutdown | |||||
| 5F.3 | Understands tailings storage facility (TSF) rules and reporting | |||||
| 5F.4 | Isolates and depressurises lines before work |
Comments / evidence:
Section 5G: Control room operation
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 5G.1 | Uses the control system (SCADA / DCS) correctly | |||||
| 5G.2 | Responds to alarms in order of priority | |||||
| 5G.3 | Correct start / stop permissives and interlocks | |||||
| 5G.4 | Clear communication with field operators and shift handover |
Comments / evidence:
Section 6: Confined space entry
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 6.1 | Identifies the space as a confined space and knows the site register / signage | |||||
| 6.2 | Confined space permit obtained, understood and displayed at the entry point | |||||
| 6.3 | All energy and material sources isolated, locked and tested (including pipes, chutes and agitators) | |||||
| 6.4 | Atmosphere tested before entry and monitored continuously (oxygen, flammable, toxic) | |||||
| 6.5 | Ventilation set up and working where required | |||||
| 6.6 | Standby person in place at the entry with communication at all times | |||||
| 6.7 | Rescue plan and rescue equipment in place and checked before entry (harness, tripod, retrieval) | |||||
| 6.8 | Entry and exit recorded (entry log / tag board) | |||||
| 6.9 | Knows when to evacuate: alarm, change in atmosphere, loss of communication | |||||
| 6.10 | Permit correctly closed out and space cleared of people, tools and equipment |
Comments / evidence:
Section 7: Housekeeping and hazards
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 7.1 | Keeps walkways and access clear | |||||
| 7.2 | Identifies dust, noise, hot surfaces and entanglement hazards | |||||
| 7.3 | Reports hazards, defects and near misses | |||||
| 7.4 | Uses correct lifting aids and manual handling |
Comments / evidence:
Section 8: Emergency response
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 8.1 | Knows emergency stop locations and use | |||||
| 8.2 | Knows emergency radio call and alarm response | |||||
| 8.3 | Knows location and use of fire equipment, eyewash and showers | |||||
| 8.4 | Knows the rescue plan for confined space or heights work |
Comments / evidence:
Outcome
Competent Competent, coaching needed Not Yet Competent (re-assess date: )
Restrictions / conditions:
Assessor name: Assessor signature: Operator signature: Date:
8. Follow-up After Authorisation Fillable
| Check | Date | Checked by | Observations | Action required |
|---|---|---|---|---|
| Week 1 | ||||
| Week 4 | ||||
| Month 3 | ||||
| Month 6 |
WA Compliance References
- Work Health and Safety Act 2020 (WA)
- Work Health and Safety (Mines) Regulations 2022 (WA): principal mining hazard management, mobile plant, isolation, competency and training records
- WorkSafe WA Mines Safety codes of practice and guidance (for example mobile plant, cranes, traffic management, fatigue, isolation, confined spaces and working at heights)
- Site Safety Management System, Traffic Management Plan and OEM operator manuals
- High risk work licences for cranes and AS 2550 (cranes); AS 2865 (confined spaces)
- Department of Transport WA: HR licence class for haul trucks and articulated dump trucks
- Nationally recognised RII (Resources and Infrastructure) units for plant operations. Check current unit codes on training.gov.au before mapping VOCs to units
- Keep training and VOC records for the life of employment and as required by the mine's record-keeping procedure
1. Purpose
To align all plant trainers and assessors to one standard across mobile and fixed plant.
2. Trainer Entry Requirements
- Current authorisation on the equipment or plant area
- Minimum 2 years relevant operating experience (site to confirm)
- TAE40122 Certificate IV in Training and Assessment or assessor skill set, or working under a qualified assessor
- Clean safety record in the last 12 months
3. Trainer VOC Fillable
Trainer name: Employee no: Equipment / area:
Lead assessor: Date:
Rating key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | CF = Critical Fail | N/A = Not applicable
Root cause (RCA column)
| Code | Root cause | What it means |
|---|---|---|
| P | Planning | Did not plan the session, training area or sequence in advance. |
| O | Observation | Did not check entry requirements, the trainee, the work area or hazards. |
| T | Technique | Incorrect demonstration or training method. |
| VK | Vehicle Knowledge | Not enough understanding of the machine or plant: systems, controls, safety devices, hazards and emergency equipment. |
| J | Judgment / Compliance | Poor judgment of safety or the outcome, or a breach of site rules or the VOC criteria. |
| CM | Communication | Did not brief, explain, give feedback or record clearly. |
RCA column: each item has its most likely root cause code. The code appears once C, F or P is ticked and is coloured by the rating: green for C, orange for F and red for P. Change the code if a different cause applies.
F and P items, with their root cause, appear on the Competency and Compliance Dashboard for managers to follow up, record the action taken and verify.
Section 1: Preparation
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 1.1 | Checks trainee entry requirements and records | |||||
| 1.2 | Plans the session and selects a safe training area | |||||
| 1.3 | Briefs trainee on objectives and critical-fail items |
Comments / evidence:
Section 2: Delivery
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 2.1 | Demonstrates correctly to site and OEM standard | |||||
| 2.2 | Explains the why as well as the how | |||||
| 2.3 | Gives clear, timely and respectful feedback | |||||
| 2.4 | Keeps control of safety at all times |
Comments / evidence:
Section 3: Assessment and records
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 3.1 | Assesses against the VOC criteria only | |||||
| 3.2 | Records factual evidence | |||||
| 3.3 | Makes a fair and consistent outcome decision | |||||
| 3.4 | Completes and files records the same day |
Comments / evidence:
Section 4: complete only the section for the equipment or plant area selected above: 4A to 4O for mobile plant, 4P to 4Z for fixed plant.
Section 4A: Haul truck (rigid or articulated)
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3A of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4A.1 | Holds a current HR (Heavy Rigid) licence or higher, required for all haul trucks and articulated dump trucks on WA mine sites, plus site authorisation for the truck model (tick N/A if an HR licence is not required) | |||||
| 4A.2 | Correct queueing, spotting and reversing to loading unit | |||||
| 4A.3 | Loads under instruction from loader operator; stays in cab | |||||
| 4A.4 | Maintains safe position on dump / tip head; uses windrow as a marker, not a stop | |||||
| 4A.5 | Checks for underfoot hazards and edges before tipping | |||||
| 4A.6 | Lowers tray fully before moving off | |||||
| 4A.7 | Monitors payload, tyre temperatures and alarms |
Comments / evidence:
Section 4B: Excavator
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3B of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4B.1 | Correct bench set-up: floor level, stable, track position with final drives to rear | |||||
| 4B.2 | Controlled digging and loading, no swinging over cabs | |||||
| 4B.3 | Communicates positioning with truck operators | |||||
| 4B.4 | Maintains safe face height and manages face stability / overhangs | |||||
| 4B.5 | Correct tracking and walking with bucket low |
Comments / evidence:
Section 4C: Dozer
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3C of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4C.1 | Pushes and rips safely, maintains control on slopes | |||||
| 4C.2 | Correct edge work and windrow construction to site standard | |||||
| 4C.3 | Maintains visibility, spotter used where required | |||||
| 4C.4 | Correct walking and parking with blade and ripper grounded |
Comments / evidence:
Section 4D: Wheel loader
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3D of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4D.1 | Loads trucks evenly and within payload | |||||
| 4D.2 | Maintains stable stockpile / face | |||||
| 4D.3 | Correct bucket height when travelling | |||||
| 4D.4 | Correct hand signals or radio when loading |
Comments / evidence:
Section 4E: Grader
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3E of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4E.1 | Maintains road crossfall, drainage and windrow height to spec | |||||
| 4E.2 | Positions safely in traffic with correct communications | |||||
| 4E.3 | Correct blade and articulation control |
Comments / evidence:
Section 4F: Water cart
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3F of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4F.1 | Waters to schedule without creating slippery conditions | |||||
| 4F.2 | Keeps off intersections, ramps and braking areas when watering | |||||
| 4F.3 | Correct fill-point procedure |
Comments / evidence:
Section 4G: Mobile crane (non-slewing, e.g. Franna / pick and carry)
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3G of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4G.1 | Holds the correct high risk work licence class for the crane | |||||
| 4G.2 | Checks lift plan, load weight, load chart and ground conditions before lifting | |||||
| 4G.3 | Pre-start of hook, block, wire rope / chains, limit switches and load moment indicator | |||||
| 4G.4 | Travels with load low, within the pick and carry chart and site speed limit | |||||
| 4G.5 | Correct communication with dogman / rigger (hand signals or radio) | |||||
| 4G.6 | Keeps exclusion zone clear and never lifts over people | |||||
| 4G.7 | Maintains power line clearances | |||||
| 4G.8 | Stops lifting when wind or visibility is outside limits |
Comments / evidence:
Section 4H: Slewing mobile crane (all-terrain, crawler, truck-mounted)
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3H of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4H.1 | Holds the correct high risk work licence class for the crane (slewing class and capacity) | |||||
| 4H.2 | Reviews lift study / lift plan, rigging and load chart for radius and configuration | |||||
| 4H.3 | Correct set-up: level ground, outriggers fully extended on pads / mats, ground bearing checked | |||||
| 4H.4 | Sets and checks load moment indicator and crane configuration settings | |||||
| 4H.5 | Barricades slew radius and tail swing zone | |||||
| 4H.6 | Controlled slewing, hoisting and luffing with smooth load control | |||||
| 4H.7 | Correct use of taglines and communication with dogman / rigger | |||||
| 4H.8 | Maintains power line clearances and monitors wind speed | |||||
| 4H.9 | Correct stowing and travel configuration after lifting |
Comments / evidence:
Section 4I: Integrated tool carrier (IT) and telehandler
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3I of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4I.1 | Correct attachment fitted, locked and pin-checked before use | |||||
| 4I.2 | Uses load chart for boom angle, extension and attachment | |||||
| 4I.3 | Stabilisers / outriggers set where required | |||||
| 4I.4 | Travels with load low and tilted back | |||||
| 4I.5 | Never uses the machine as a work platform unless it is rated and fitted with an approved basket |
Comments / evidence:
Section 4J: Forklift
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3J of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4J.1 | Holds a forklift high risk work licence (LF) where required | |||||
| 4J.2 | Checks load weight against the data plate | |||||
| 4J.3 | Travels with forks low and load tilted back; reverses when vision is blocked | |||||
| 4J.4 | Keeps pedestrians clear and uses horn at blind corners | |||||
| 4J.5 | Parks with forks lowered, park brake on and key removed |
Comments / evidence:
Section 4K: Backhoe and skid steer loader
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3K of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4K.1 | Sets stabilisers before digging (backhoe) | |||||
| 4K.2 | Locates and marks underground services before digging | |||||
| 4K.3 | Maintains safe swing zone and exclusion area | |||||
| 4K.4 | Keeps the bucket low when travelling; stays within rated operating capacity (skid steer) | |||||
| 4K.5 | Uses seat bar / restraint and never leaves controls with attachment raised |
Comments / evidence:
Section 4L: Drill rig (production and exploration)
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3L of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4L.1 | Pre-start of mast, rods, hoses, dust suppression and emergency stops | |||||
| 4L.2 | Correct set-up and levelling on pattern, away from crest and open holes | |||||
| 4L.3 | Keeps exclusion zone around rotating parts and never wears loose clothing near them | |||||
| 4L.4 | Correct rod handling and use of rod-handling system | |||||
| 4L.5 | Follows explosives and charging-area rules when working near loaded holes | |||||
| 4L.6 | Correct mast lowering and tramming procedure |
Comments / evidence:
Section 4M: Scraper and compactor / roller
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3M of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4M.1 | Maintains safe speed and control when loaded and on grade | |||||
| 4M.2 | Correct cut, load and spread sequence (scraper) | |||||
| 4M.3 | Checks edges and soft ground before compacting | |||||
| 4M.4 | Uses correct vibration settings and stays clear of structures and services (roller) |
Comments / evidence:
Section 4N: Service, fuel and lube truck
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3N of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4N.1 | Parks, chocks and isolates the truck at the service bay or go-line | |||||
| 4N.2 | Positive communication with the operator before approaching plant | |||||
| 4N.3 | Correct fuel and lube connection with spill kit ready | |||||
| 4N.4 | Earthing / bonding and no ignition sources during refuelling | |||||
| 4N.5 | Manages hoses and reels to avoid trip and whip hazards |
Comments / evidence:
Section 4O: Tyre handler
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3O of the Mobile Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4O.1 | Correct grip, lift and rotation, exclusion zone around tyre work | |||||
| 4O.2 | Follows tyre deflation and handling procedure |
Comments / evidence:
Section 4P: Conveyors
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3 of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4P.1 | Inspects belts, idlers, pulleys, skirts and guards only with guards in place or plant isolated | |||||
| 4P.2 | Understands pull-wire, belt-drift and zero-speed switches | |||||
| 4P.3 | Correct cleanup procedure around conveyors (isolated, no reaching past guards) | |||||
| 4P.4 | Identifies and reports spillage, damaged guards and tracking issues |
Comments / evidence:
Section 4Q: Crushers and screens
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 4 of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4Q.1 | Follows start-up and shutdown sequence | |||||
| 4Q.2 | Correct blockage clearing procedure (isolated, no manual clearing while running) | |||||
| 4Q.3 | Monitors feed, product size, amps and alarms | |||||
| 4Q.4 | Recognises signs of wear, vibration and overheating |
Comments / evidence:
Section 4R: Processing and pumps (mills, thickeners, tanks)
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5 of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4R.1 | Operates from control system / panel correctly | |||||
| 4R.2 | Monitors levels, pressures and flows | |||||
| 4R.3 | Understands chemical and reagent hazards (SDS) and handles safely | |||||
| 4R.4 | Correct response to spills and bunding requirements |
Comments / evidence:
Section 4S: Stackers, reclaimers and ship / train loaders
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5A of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4S.1 | Checks travel path, rail and cable reel before moving | |||||
| 4S.2 | Correct boom, bucket-wheel and slew control within limits | |||||
| 4S.3 | Monitors collision avoidance and anti-collision systems | |||||
| 4S.4 | Follows wind and storm shutdown procedures | |||||
| 4S.5 | Correct communication with control room and port / rail staff |
Comments / evidence:
Section 4T: Feeders, bins and chutes
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5B of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4T.1 | Correct feed rate control and monitoring of levels | |||||
| 4T.2 | Follows hang-up and blockage procedure (no entry, isolate first) | |||||
| 4T.3 | Understands bin and hopper entry is a confined space | |||||
| 4T.4 | Recognises signs of wear and material build-up |
Comments / evidence:
Section 4U: Overhead cranes, hoists and gantries
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5C of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4U.1 | Holds the correct licence where required (for example CB, CN, or site authorisation) | |||||
| 4U.2 | Pre-use check of hook, limits, brakes and pendant / remote | |||||
| 4U.3 | Rated capacity known and not exceeded | |||||
| 4U.4 | Keeps load clear of people and walkways; uses taglines | |||||
| 4U.5 | Correct slinging with a qualified dogman / rigger |
Comments / evidence:
Section 4V: Compressors, boilers and pressure equipment
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5D of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4V.1 | Knows the pressure equipment hazards and relief devices | |||||
| 4V.2 | Checks pressures, temperatures and alarms against limits | |||||
| 4V.3 | Follows start-up, shutdown and blowdown procedures | |||||
| 4V.4 | Isolates and depressurises before any work |
Comments / evidence:
Section 4W: Filtration, flotation and leach plant
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5E of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4W.1 | Monitors reagent dosing and process conditions | |||||
| 4W.2 | Understands cyanide, acid, caustic and other reagent hazards (SDS) where used | |||||
| 4W.3 | Uses gas detectors and PPE correctly in reagent areas | |||||
| 4W.4 | Correct response to leaks, spills and gas alarms |
Comments / evidence:
Section 4X: Water, tailings and dewatering pumps
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5F of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4X.1 | Checks suction, discharge, seals and pipework | |||||
| 4X.2 | Correct priming, start-up and shutdown | |||||
| 4X.3 | Understands tailings storage facility (TSF) rules and reporting | |||||
| 4X.4 | Isolates and depressurises lines before work |
Comments / evidence:
Section 4Y: Control room operation
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5G of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4Y.1 | Uses the control system (SCADA / DCS) correctly | |||||
| 4Y.2 | Responds to alarms in order of priority | |||||
| 4Y.3 | Correct start / stop permissives and interlocks | |||||
| 4Y.4 | Clear communication with field operators and shift handover |
Comments / evidence:
Section 4Z: Confined space entry
Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable
Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 6 of the Fixed Plant VOC.
| # | Criteria | C | F | P | N/A | RCA |
|---|---|---|---|---|---|---|
| 4Z.1 | Identifies the space as a confined space and knows the site register / signage | |||||
| 4Z.2 | Confined space permit obtained, understood and displayed at the entry point | |||||
| 4Z.3 | All energy and material sources isolated, locked and tested (including pipes, chutes and agitators) | |||||
| 4Z.4 | Atmosphere tested before entry and monitored continuously (oxygen, flammable, toxic) | |||||
| 4Z.5 | Ventilation set up and working where required | |||||
| 4Z.6 | Standby person in place at the entry with communication at all times | |||||
| 4Z.7 | Rescue plan and rescue equipment in place and checked before entry (harness, tripod, retrieval) | |||||
| 4Z.8 | Entry and exit recorded (entry log / tag board) | |||||
| 4Z.9 | Knows when to evacuate: alarm, change in atmosphere, loss of communication | |||||
| 4Z.10 | Permit correctly closed out and space cleared of people, tools and equipment |
Comments / evidence:
Outcome
Competent Competent, coaching needed Not Yet Competent (re-assess date: )
Restrictions / conditions:
Assessor name: Assessor signature: Trainer signature: Date:
4. Ongoing Standards
- Annual trainer VOC
- Quarterly moderation meeting to compare assessment decisions
- Maintain currency on the equipment trained
WA Compliance References
- Work Health and Safety Act 2020 (WA)
- Work Health and Safety (Mines) Regulations 2022 (WA): principal mining hazard management, mobile plant, isolation, competency and training records
- WorkSafe WA Mines Safety codes of practice and guidance (for example mobile plant, cranes, traffic management, fatigue, isolation, confined spaces and working at heights)
- Site Safety Management System, Traffic Management Plan and OEM operator manuals
- High risk work licences for cranes and AS 2550 (cranes); AS 2865 (confined spaces)
- Department of Transport WA: HR licence class for haul trucks and articulated dump trucks
- Nationally recognised RII (Resources and Infrastructure) units for plant operations. Check current unit codes on training.gov.au before mapping VOCs to units
- Keep training and VOC records for the life of employment and as required by the mine's record-keeping procedure
