Integrated Operator SolutionsMine Site Plant Training and VOC HubDriver Training →

How to Use the App

Guide PDF Guide Word

Getting Started

  • Open integrateddriversolutions.com/operator in Chrome (Android) or Safari (iPhone/iPad) and sign in with the email and password from your site manager or Integrated Operator Solutions.
  • Change your temporary password straight away under Account (or Accounts for managers) > Change my password.
  • You stay signed in on that device for 14 days. On a shared tablet, tap Sign out at the end of your shift.
  • Set up in both apps with the same email and password? Signing in here also signs you in to Driver Training, so you can switch with the button at the top without signing in again. Sign out signs you out of both.
  • Managers and Training Compliance staff can tap Dashboard → in the menu, under Home, to open the Dashboard without signing in again.
  • To install the app on a phone or tablet: on the home page (integrateddriversolutions.com) tap Download The App, then Install IDS. If there is no Install button on Android (Chrome), open the three-dot menu and tap Install app / Add to Home screen. On iPhone or iPad, open the home page in Safari, tap Share, then Add to Home Screen. IDS is one app for Driver Training, Plant Training and the Dashboard.
  • Open IDS from the new home-screen icon. It opens on the home page; tap Plant Training and sign in once. The installed app keeps you signed in for 14 days, the same as the browser.
  • Use the left-hand menu to choose a program. On a phone, tap Menu at the top.

Programs in the App

  • Mobile Plant Program: haul trucks, excavators, dozers, loaders, graders, water carts, mobile and slewing cranes, IT tool carriers, telehandlers, forklifts, backhoes, skid steers, drill rigs, scrapers, rollers, service trucks and tyre handlers. Light vehicles, mini buses and coaches are assessed in the Driver Training app. Contains the Daily Training Log, Mobile Plant VOC and follow-up table.
  • Fixed Plant Program: crushers, conveyors, screens, mills, stackers, reclaimers, loaders, feeders, overhead cranes, pressure equipment, processing, tailings and water pumps, control rooms and confined space entry. Contains the Daily Training Log, Fixed Plant VOC and follow-up table.
  • Plant Trainer and Assessor Standard: aligns all plant trainers and assessors to one standard. Contains the Trainer VOC.
  • Sections marked Fillable can be completed on screen.

Completing a VOC on Screen

  • Tap Records, find or add the operator, then tap Mobile Plant VOC, Fixed Plant VOC or Trainer VOC. The VOC opens and the bar at the top shows the operator, VOC type, Draft or Complete, and how many items are rated.
  • Type the equipment, fleet number and area in the shaded fields.
  • Check the critical-fail list first. If any critical fail occurs, stop the assessment, make the plant safe and record it.
  • Tick C (Competent), F (Fair, needs coaching), P (Poor, Not Yet Competent) or N/A (Not applicable) for each item. A ticked F box turns orange and a ticked P box shows a red X. Only one box can be ticked per row.
  • Choose the equipment type (Mobile Plant) or plant area (Fixed Plant) first. The VOC then shows only the general sections and the section for that equipment or area; the other equipment sections stay hidden and are not counted. Tick Show all sections to see every section, for example when one VOC covers more than one machine.
  • Write factual evidence in the comments fields (what you saw, where, when).
  • The progress bar under each VOC heading shows how many items are rated and the overall result.

Root Cause (RCA) Column

  • Each VOC item has an RCA box beside N/A. When you tick C, F or P, it fills in with the most likely root cause for that item.
  • The codes are: P Planning, O Observation, T Technique, VK Vehicle Knowledge (machine and plant systems, controls, safety devices and hazards), J Judgment / Compliance, CM Communication.
  • The box is coloured by the rating: green for C, orange for F and red for P. Ticking N/A leaves it blank.
  • If a different cause applies, tap the box and choose another code. The Root cause legend above Section 1 of each VOC explains every code.
  • The progress bar shows when every F and P item has a root cause recorded.
  • When the VOC is marked complete, each F and P item and its root cause appears under Corrective actions on the Competency and Compliance Dashboard. A manager records the action taken and marks it completed, then a different person verifies and closes it.
  • On the Word or fillable PDF version, the RCA column is pre-filled with the same codes. Use the Root cause and corrective action record table under the legend to write the action, owner and due date.

Saving and Keeping Records

  • Every tick and entry saves automatically to your company's secure records a moment after you make it. A Saved message appears in the corner.
  • Entries only save while a record is open. If the top bar says No record open, start or open a record first.
  • When the assessment is finished, tap Mark complete. The record is locked and the result is recorded. If a VOC was interrupted (for example a breakdown) and marked complete before every item was rated, the assessor who started it can tap Reopen to finish it. A VOC with every item rated can only be reopened by a site manager. If you just need a break, you don't need to mark it complete: close the record and it stays in progress.
  • Tap Close record before starting the next person.
  • To find a past VOC, tap Records > All records and search by operator name or employee number. Tap an operator's name to see their full history.
  • For a copy, open the record, tap Print / Save PDF. Name the file: Surname_FirstName_VOC-Type_Equipment_YYYY-MM-DD.pdf.
  • To print only the VOC, tap Print this section only beside the heading.

Other Options

  • Word: download the editable Word version of any program to change content or print blank copies.
  • Fillable PDF: the app needs an internet connection to save records, so use the fillable PDF where there is no coverage and save it under the naming rule above.
  • Managers: use Accounts to add assessors, change a user's role (Manager, Assessor or Training Compliance), reset passwords and switch accounts off, and Records to review and reopen completed VOCs. Training Compliance accounts can view records and add operators, but cannot start or change VOCs.
  • Guide: this How to Use guide is also available as a PDF and Word file.

Good Practice

  • Complete the VOC during or straight after the assessment, never later from memory.
  • Never pre-fill ratings or sign off items you did not observe.
  • Do not use the app while operating plant. Park up in a safe location first.
  • Assess on the actual site equipment and in the actual work area wherever possible.

WA Compliance References

  • Work Health and Safety Act 2020 (WA)
  • Work Health and Safety (Mines) Regulations 2022 (WA): principal mining hazard management, mobile plant, isolation, competency and training records
  • WorkSafe WA Mines Safety codes of practice and guidance (for example mobile plant, cranes, traffic management, fatigue, isolation, confined spaces and working at heights)
  • Site Safety Management System, Traffic Management Plan and OEM operator manuals
  • High risk work licences for cranes and AS 2550 (cranes); AS 2865 (confined spaces)
  • Department of Transport WA: HR licence class for haul trucks and articulated dump trucks
  • Nationally recognised RII (Resources and Infrastructure) units for plant operations. Check current unit codes on training.gov.au before mapping VOCs to units
  • Keep training and VOC records for the life of employment and as required by the mine's record-keeping procedure

Mobile Plant Program and VOC

Word Fillable PDF

1. Purpose

To provide a consistent, site-based training and verification of competency (VOC) process for mobile plant operators so every operator is trained, assessed and authorised to one standard.

2. Scope

  • Haul trucks (rigid and articulated)
  • Excavators and shovels
  • Dozers (track and wheel)
  • Wheel loaders
  • Graders
  • Water carts
  • Mobile cranes (non-slewing / pick and carry)
  • Slewing mobile cranes (all-terrain, crawler and truck-mounted)
  • Integrated tool carriers and telehandlers
  • Forklifts
  • Backhoes and skid steer loaders
  • Drill rigs (production and exploration)
  • Scrapers and compactors / rollers
  • Service, fuel and lube trucks
  • Tyre handlers
  • Other mobile plant listed on the site authorisation matrix

3. Entry Requirements

  • Site induction completed
  • Current licence of the class required for the equipment or site (for example HR or higher for haul trucks and articulated dump trucks)
  • Haul truck and articulated dump truck operators: current HR (Heavy Rigid) licence or higher, required on all WA mine sites
  • Crane operators: current high risk work licence for the crane class
  • Fitness for work medical and drug and alcohol clearance
  • Relevant nationally recognised unit or prior experience evidence (for RPL)
  • Supervisor nomination for the equipment type

4. Program Stages

StageActivityMinimum
1Theory: OEM manual, site rules, TMP, hazards1 shift
2Static familiarisation and pre-start with trainer1 shift
3Supervised operation in low-risk area3 to 5 shifts
4Supervised operation in production5 to 10 shifts or as required
5VOC by an approved assessor1 assessment
6Authorisation and follow-up checksWeeks 1 and 4, months 3 and 6

Hours are a guide. Progress is based on competence, not time.

5. Training Content (by topic)

  • Site rules, Traffic Management Plan, road design and right-of-way
  • Fitness for work, fatigue and shift change hazards
  • OEM controls, alarms, fire suppression and emergency stops
  • Pre-start inspection and defect reporting
  • Loading, hauling, dumping and bench/face operations
  • Collision avoidance, proximity detection and blind spots
  • Isolation, tag-out and working near maintenance crews
  • Emergency response: fire, rollover, tyre fire, power lines
  • Cranes: load charts, lift planning, set-up, rigging awareness and communication with dogman (high risk work licence required)

6. Daily Training Log (one per shift) Fillable

Trainee name: Employee no: Trainer:

DayDateEquipment / areaTasks coveredHoursTrainer comments
1
2
3
4
5
6
7

Trainer signature: Trainee signature:

7. Mobile Plant VOC Fillable

Operator name: Employee no: Site authorisation no:

Assessor: Date: Equipment type: Fleet no:

Area / pit: Shift and conditions:

HR licence no: Expiry: Sighted N/A (HR licence not required for this equipment or site)

Type: Initial Annual Post-incident New equipment type Return to work

Rating key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | CF = Critical Fail | N/A = Not applicable

Critical-fail items (any one ends the assessment and the result is Not Yet Competent)

  • Speeding or failing to follow the Traffic Management Plan
  • Failing to give way or positive communication, causing another operator to react
  • Unsafe proximity to edge, crest, windrow or unstable ground
  • Contact with any person, vehicle, structure or plant
  • Operating with a known critical defect (brakes, steering, fire suppression)
  • Leaving the cab in an exclusion zone or while plant is not secured
  • Using a mobile phone while operating
  • Assessor has to take control or stop the operation to prevent an incident
  • Operating while fatigued or impaired
  • Crane: lifting over people, exceeding the load chart, overriding the load moment indicator, or breaching power line clearances
  • Drill rig: entering the rotating-parts exclusion zone while the rig is live
  • Forklift / telehandler: raising or travelling with a load over people

Critical fail observed: No Yes:

Root cause (RCA column)
CodeRoot causeWhat it means
PPlanningDid not plan the task, set-up, travel path or lift in advance. Late decisions, no contingency.
OObservationDid not check the machine, work area, people or hazards. Poor scanning or monitoring.
TTechniqueIncorrect physical operation: controls, positioning, speed, procedure steps.
VKVehicle KnowledgeNot enough understanding of the machine or plant: systems, controls, safety devices, hazards and emergency equipment.
JJudgment / CompliancePoor judgment of distance, speed, ground or limits, or a breach of site rules, permits or licensing.
CMCommunicationDid not use radio, hand signals or positive communication, or did not report or record clearly.

RCA column: each item has its most likely root cause code. The code appears once C, F or P is ticked and is coloured by the rating: green for C, orange for F and red for P. Change the code if a different cause applies.

F and P items, with their root cause, appear on the Competency and Compliance Dashboard for managers to follow up, record the action taken and verify.

Section 1: Fitness for work and pre-start

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
1.1Fit for work: fatigue, alcohol and drug requirements met, correct PPE worn
1.2Holds site authorisation / permit for the equipment
1.3Walk-around in OEM sequence: tyres/tracks, hydraulics, leaks, guards, lights, fire suppression, access systems
1.4Fluid levels checked (engine, hydraulic, coolant, fuel)
1.5In-cab checks: gauges, brakes, steering, horn, reversing alarm, camera/proximity detection, seat belt, radio
1.6Defects recorded on pre-start and reported; tagged out if unsafe
1.7Uses three points of contact on access and egress

Comments / evidence:

Section 2: General operation and traffic management

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
2.1Radio communications clear, correct channel and call signs
2.2Follows Traffic Management Plan, road rules and site speed limits
2.3Maintains safe following distance and correct right-of-way at intersections
2.4Correct positive communication before approaching or passing other plant and light vehicles
2.5Adjusts operation for road conditions, dust, wet, night and gradients
2.6Correct use of retarder / engine brake and gears on grade
2.7Parks correctly: park brake, bucket/blade grounded, chocked or on windrow as required
2.8Correct shutdown, isolation and cool-down procedure

Comments / evidence:

Section 3A: Haul truck (rigid or articulated)

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3A.1Holds a current HR (Heavy Rigid) licence or higher, required for all haul trucks and articulated dump trucks on WA mine sites, plus site authorisation for the truck model (tick N/A if an HR licence is not required)
3A.2Correct queueing, spotting and reversing to loading unit
3A.3Loads under instruction from loader operator; stays in cab
3A.4Maintains safe position on dump / tip head; uses windrow as a marker, not a stop
3A.5Checks for underfoot hazards and edges before tipping
3A.6Lowers tray fully before moving off
3A.7Monitors payload, tyre temperatures and alarms

Comments / evidence:

Section 3B: Excavator

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3B.1Correct bench set-up: floor level, stable, track position with final drives to rear
3B.2Controlled digging and loading, no swinging over cabs
3B.3Communicates positioning with truck operators
3B.4Maintains safe face height and manages face stability / overhangs
3B.5Correct tracking and walking with bucket low

Comments / evidence:

Section 3C: Dozer

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3C.1Pushes and rips safely, maintains control on slopes
3C.2Correct edge work and windrow construction to site standard
3C.3Maintains visibility, spotter used where required
3C.4Correct walking and parking with blade and ripper grounded

Comments / evidence:

Section 3D: Wheel loader

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3D.1Loads trucks evenly and within payload
3D.2Maintains stable stockpile / face
3D.3Correct bucket height when travelling
3D.4Correct hand signals or radio when loading

Comments / evidence:

Section 3E: Grader

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3E.1Maintains road crossfall, drainage and windrow height to spec
3E.2Positions safely in traffic with correct communications
3E.3Correct blade and articulation control

Comments / evidence:

Section 3F: Water cart

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3F.1Waters to schedule without creating slippery conditions
3F.2Keeps off intersections, ramps and braking areas when watering
3F.3Correct fill-point procedure

Comments / evidence:

Section 3G: Mobile crane (non-slewing, e.g. Franna / pick and carry)

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3G.1Holds the correct high risk work licence class for the crane
3G.2Checks lift plan, load weight, load chart and ground conditions before lifting
3G.3Pre-start of hook, block, wire rope / chains, limit switches and load moment indicator
3G.4Travels with load low, within the pick and carry chart and site speed limit
3G.5Correct communication with dogman / rigger (hand signals or radio)
3G.6Keeps exclusion zone clear and never lifts over people
3G.7Maintains power line clearances
3G.8Stops lifting when wind or visibility is outside limits

Comments / evidence:

Section 3H: Slewing mobile crane (all-terrain, crawler, truck-mounted)

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3H.1Holds the correct high risk work licence class for the crane (slewing class and capacity)
3H.2Reviews lift study / lift plan, rigging and load chart for radius and configuration
3H.3Correct set-up: level ground, outriggers fully extended on pads / mats, ground bearing checked
3H.4Sets and checks load moment indicator and crane configuration settings
3H.5Barricades slew radius and tail swing zone
3H.6Controlled slewing, hoisting and luffing with smooth load control
3H.7Correct use of taglines and communication with dogman / rigger
3H.8Maintains power line clearances and monitors wind speed
3H.9Correct stowing and travel configuration after lifting

Comments / evidence:

Section 3I: Integrated tool carrier (IT) and telehandler

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3I.1Correct attachment fitted, locked and pin-checked before use
3I.2Uses load chart for boom angle, extension and attachment
3I.3Stabilisers / outriggers set where required
3I.4Travels with load low and tilted back
3I.5Never uses the machine as a work platform unless it is rated and fitted with an approved basket

Comments / evidence:

Section 3J: Forklift

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3J.1Holds a forklift high risk work licence (LF) where required
3J.2Checks load weight against the data plate
3J.3Travels with forks low and load tilted back; reverses when vision is blocked
3J.4Keeps pedestrians clear and uses horn at blind corners
3J.5Parks with forks lowered, park brake on and key removed

Comments / evidence:

Section 3K: Backhoe and skid steer loader

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3K.1Sets stabilisers before digging (backhoe)
3K.2Locates and marks underground services before digging
3K.3Maintains safe swing zone and exclusion area
3K.4Keeps the bucket low when travelling; stays within rated operating capacity (skid steer)
3K.5Uses seat bar / restraint and never leaves controls with attachment raised

Comments / evidence:

Section 3L: Drill rig (production and exploration)

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3L.1Pre-start of mast, rods, hoses, dust suppression and emergency stops
3L.2Correct set-up and levelling on pattern, away from crest and open holes
3L.3Keeps exclusion zone around rotating parts and never wears loose clothing near them
3L.4Correct rod handling and use of rod-handling system
3L.5Follows explosives and charging-area rules when working near loaded holes
3L.6Correct mast lowering and tramming procedure

Comments / evidence:

Section 3M: Scraper and compactor / roller

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3M.1Maintains safe speed and control when loaded and on grade
3M.2Correct cut, load and spread sequence (scraper)
3M.3Checks edges and soft ground before compacting
3M.4Uses correct vibration settings and stays clear of structures and services (roller)

Comments / evidence:

Section 3N: Service, fuel and lube truck

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3N.1Parks, chocks and isolates the truck at the service bay or go-line
3N.2Positive communication with the operator before approaching plant
3N.3Correct fuel and lube connection with spill kit ready
3N.4Earthing / bonding and no ignition sources during refuelling
3N.5Manages hoses and reels to avoid trip and whip hazards

Comments / evidence:

Section 3O: Tyre handler

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3O.1Correct grip, lift and rotation, exclusion zone around tyre work
3O.2Follows tyre deflation and handling procedure

Comments / evidence:

Section 4: Emergency and hazard awareness

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
4.1Knows emergency procedure, muster point and emergency radio call
4.2Knows fire suppression activation and extinguisher use
4.3Identifies and reports hazards and near misses
4.4Understands power line, geotechnical and unstable ground hazards

Comments / evidence:

Outcome

Competent Competent, coaching needed Not Yet Competent (re-assess date: )

Restrictions / conditions:

Assessor name: Assessor signature: Operator signature: Date:

8. Follow-up After Authorisation Fillable

CheckDateChecked byObservationsAction required
Week 1
Week 4
Month 3
Month 6

WA Compliance References

  • Work Health and Safety Act 2020 (WA)
  • Work Health and Safety (Mines) Regulations 2022 (WA): principal mining hazard management, mobile plant, isolation, competency and training records
  • WorkSafe WA Mines Safety codes of practice and guidance (for example mobile plant, cranes, traffic management, fatigue, isolation, confined spaces and working at heights)
  • Site Safety Management System, Traffic Management Plan and OEM operator manuals
  • High risk work licences for cranes and AS 2550 (cranes); AS 2865 (confined spaces)
  • Department of Transport WA: HR licence class for haul trucks and articulated dump trucks
  • Nationally recognised RII (Resources and Infrastructure) units for plant operations. Check current unit codes on training.gov.au before mapping VOCs to units
  • Keep training and VOC records for the life of employment and as required by the mine's record-keeping procedure

Fixed Plant Program and VOC

Word Fillable PDF

1. Purpose

To provide a consistent training and VOC process for fixed plant operators and maintainers so every person is trained, assessed and authorised to one standard.

2. Scope

  • Crushing and screening plant
  • Conveyors, feeders and stackers
  • Grinding mills, cyclones and thickeners
  • Pumps, tanks and reagent systems
  • Stackers, reclaimers and ship / train loaders
  • Feeders, bins and chutes
  • Overhead cranes, hoists and gantries
  • Compressors, boilers and pressure equipment
  • Filtration, flotation and leach plant
  • Water, tailings and dewatering pumps
  • Fixed plant control rooms and panels
  • Confined spaces: bins, hoppers, chutes, tanks, thickeners, mills and pits

3. Entry Requirements

  • Site induction and plant-area induction
  • Isolation (lock-out tag-out) training
  • Fitness for work medical and drug and alcohol clearance
  • Confined space entry training (nationally recognised) for anyone entering or acting as standby
  • Working at heights ticket where the role requires it
  • Supervisor nomination for the plant area

4. Program Stages

StageActivityMinimum
1Theory: process flow, site rules, isolation, hazards1 shift
2Plant walk-through with trainer1 to 2 shifts
3Supervised operation and isolations5 to 10 shifts
4VOC by an approved assessor1 assessment
5Authorisation and follow-up checksWeeks 1 and 4, months 3 and 6

5. Training Content (by topic)

  • Process flow and plant layout
  • Permits to work, JHA and Take 5
  • Isolation and lock-out tag-out
  • Guarding, emergency stops and pull wires
  • Blockage clearing and cleanup procedures
  • Chemical, dust and noise hazards
  • Confined space entry: permits, gas testing, ventilation, standby person and rescue
  • Working at heights awareness
  • Emergency response and rescue

6. Daily Training Log (one per shift) Fillable

Trainee name: Employee no: Trainer:

DayDateEquipment / areaTasks coveredHoursTrainer comments
1
2
3
4
5
6
7

Trainer signature: Trainee signature:

7. Fixed Plant VOC Fillable

Operator name: Employee no: Role:

Assessor: Date: Plant area: Equipment ID:

Type: Initial Annual Post-incident New plant area Return to work

Rating key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | CF = Critical Fail | N/A = Not applicable

Critical-fail items (any one ends the assessment and the result is Not Yet Competent)

  • Working on plant without personal isolation and lock applied
  • Bypassing or removing a guard or interlock while plant is live
  • Reaching into or clearing a blockage on running plant
  • Entering a confined space or working at height without the permit
  • Failing to test for zero energy
  • Assessor has to stop the task to prevent an incident
  • Working while fatigued or impaired
  • Confined space: entering without a permit, gas test, standby person or rescue plan, or staying in after an alarm
  • Pressure equipment: working on a line or vessel that has not been depressurised
  • Overhead crane: lifting over people or exceeding rated capacity

Critical fail observed: No Yes:

Root cause (RCA column)
CodeRoot causeWhat it means
PPlanningDid not plan the task, set-up, travel path or lift in advance. Late decisions, no contingency.
OObservationDid not check the machine, work area, people or hazards. Poor scanning or monitoring.
TTechniqueIncorrect physical operation: controls, positioning, speed, procedure steps.
VKVehicle KnowledgeNot enough understanding of the machine or plant: systems, controls, safety devices, hazards and emergency equipment.
JJudgment / CompliancePoor judgment of distance, speed, ground or limits, or a breach of site rules, permits or licensing.
CMCommunicationDid not use radio, hand signals or positive communication, or did not report or record clearly.

RCA column: each item has its most likely root cause code. The code appears once C, F or P is ticked and is coloured by the rating: green for C, orange for F and red for P. Change the code if a different cause applies.

F and P items, with their root cause, appear on the Competency and Compliance Dashboard for managers to follow up, record the action taken and verify.

Section 1: Fitness for work and permits

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
1.1Fit for work, correct PPE for the area (including hearing, respiratory and eye protection)
1.2Correct work permit obtained and understood (general, hot work, confined space, working at heights)
1.3Take 5 / JHA / SWMS completed for the task
1.4Knows the plant area layout, emergency stops, pull wires and muster points

Comments / evidence:

Section 2: Isolation and lock-out

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
2.1Identifies all energy sources (electrical, mechanical, hydraulic, pneumatic, gravity, stored)
2.2Applies personal lock and danger tag at the correct isolation points
2.3Tests for zero energy (try start / test for dead) before work
2.4Dissipates or restrains stored energy (belt tension, material in chutes, accumulators)
2.5Correct removal of locks and return to service

Comments / evidence:

Section 3: Conveyors

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3.1Inspects belts, idlers, pulleys, skirts and guards only with guards in place or plant isolated
3.2Understands pull-wire, belt-drift and zero-speed switches
3.3Correct cleanup procedure around conveyors (isolated, no reaching past guards)
3.4Identifies and reports spillage, damaged guards and tracking issues

Comments / evidence:

Section 4: Crushers and screens

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
4.1Follows start-up and shutdown sequence
4.2Correct blockage clearing procedure (isolated, no manual clearing while running)
4.3Monitors feed, product size, amps and alarms
4.4Recognises signs of wear, vibration and overheating

Comments / evidence:

Section 5: Processing and pumps (mills, thickeners, tanks)

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
5.1Operates from control system / panel correctly
5.2Monitors levels, pressures and flows
5.3Understands chemical and reagent hazards (SDS) and handles safely
5.4Correct response to spills and bunding requirements

Comments / evidence:

Section 5A: Stackers, reclaimers and ship / train loaders

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
5A.1Checks travel path, rail and cable reel before moving
5A.2Correct boom, bucket-wheel and slew control within limits
5A.3Monitors collision avoidance and anti-collision systems
5A.4Follows wind and storm shutdown procedures
5A.5Correct communication with control room and port / rail staff

Comments / evidence:

Section 5B: Feeders, bins and chutes

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
5B.1Correct feed rate control and monitoring of levels
5B.2Follows hang-up and blockage procedure (no entry, isolate first)
5B.3Understands bin and hopper entry is a confined space
5B.4Recognises signs of wear and material build-up

Comments / evidence:

Section 5C: Overhead cranes, hoists and gantries

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
5C.1Holds the correct licence where required (for example CB, CN, or site authorisation)
5C.2Pre-use check of hook, limits, brakes and pendant / remote
5C.3Rated capacity known and not exceeded
5C.4Keeps load clear of people and walkways; uses taglines
5C.5Correct slinging with a qualified dogman / rigger

Comments / evidence:

Section 5D: Compressors, boilers and pressure equipment

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
5D.1Knows the pressure equipment hazards and relief devices
5D.2Checks pressures, temperatures and alarms against limits
5D.3Follows start-up, shutdown and blowdown procedures
5D.4Isolates and depressurises before any work

Comments / evidence:

Section 5E: Filtration, flotation and leach plant

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
5E.1Monitors reagent dosing and process conditions
5E.2Understands cyanide, acid, caustic and other reagent hazards (SDS) where used
5E.3Uses gas detectors and PPE correctly in reagent areas
5E.4Correct response to leaks, spills and gas alarms

Comments / evidence:

Section 5F: Water, tailings and dewatering pumps

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
5F.1Checks suction, discharge, seals and pipework
5F.2Correct priming, start-up and shutdown
5F.3Understands tailings storage facility (TSF) rules and reporting
5F.4Isolates and depressurises lines before work

Comments / evidence:

Section 5G: Control room operation

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
5G.1Uses the control system (SCADA / DCS) correctly
5G.2Responds to alarms in order of priority
5G.3Correct start / stop permissives and interlocks
5G.4Clear communication with field operators and shift handover

Comments / evidence:

Section 6: Confined space entry

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
6.1Identifies the space as a confined space and knows the site register / signage
6.2Confined space permit obtained, understood and displayed at the entry point
6.3All energy and material sources isolated, locked and tested (including pipes, chutes and agitators)
6.4Atmosphere tested before entry and monitored continuously (oxygen, flammable, toxic)
6.5Ventilation set up and working where required
6.6Standby person in place at the entry with communication at all times
6.7Rescue plan and rescue equipment in place and checked before entry (harness, tripod, retrieval)
6.8Entry and exit recorded (entry log / tag board)
6.9Knows when to evacuate: alarm, change in atmosphere, loss of communication
6.10Permit correctly closed out and space cleared of people, tools and equipment

Comments / evidence:

Section 7: Housekeeping and hazards

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
7.1Keeps walkways and access clear
7.2Identifies dust, noise, hot surfaces and entanglement hazards
7.3Reports hazards, defects and near misses
7.4Uses correct lifting aids and manual handling

Comments / evidence:

Section 8: Emergency response

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
8.1Knows emergency stop locations and use
8.2Knows emergency radio call and alarm response
8.3Knows location and use of fire equipment, eyewash and showers
8.4Knows the rescue plan for confined space or heights work

Comments / evidence:

Outcome

Competent Competent, coaching needed Not Yet Competent (re-assess date: )

Restrictions / conditions:

Assessor name: Assessor signature: Operator signature: Date:

8. Follow-up After Authorisation Fillable

CheckDateChecked byObservationsAction required
Week 1
Week 4
Month 3
Month 6

WA Compliance References

  • Work Health and Safety Act 2020 (WA)
  • Work Health and Safety (Mines) Regulations 2022 (WA): principal mining hazard management, mobile plant, isolation, competency and training records
  • WorkSafe WA Mines Safety codes of practice and guidance (for example mobile plant, cranes, traffic management, fatigue, isolation, confined spaces and working at heights)
  • Site Safety Management System, Traffic Management Plan and OEM operator manuals
  • High risk work licences for cranes and AS 2550 (cranes); AS 2865 (confined spaces)
  • Department of Transport WA: HR licence class for haul trucks and articulated dump trucks
  • Nationally recognised RII (Resources and Infrastructure) units for plant operations. Check current unit codes on training.gov.au before mapping VOCs to units
  • Keep training and VOC records for the life of employment and as required by the mine's record-keeping procedure

Plant Trainer and Assessor Standard and VOC

Word Fillable PDF

1. Purpose

To align all plant trainers and assessors to one standard across mobile and fixed plant.

2. Trainer Entry Requirements

  • Current authorisation on the equipment or plant area
  • Minimum 2 years relevant operating experience (site to confirm)
  • TAE40122 Certificate IV in Training and Assessment or assessor skill set, or working under a qualified assessor
  • Clean safety record in the last 12 months

3. Trainer VOC Fillable

Trainer name: Employee no: Equipment / area:

Lead assessor: Date:

Rating key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | CF = Critical Fail | N/A = Not applicable

Root cause (RCA column)
CodeRoot causeWhat it means
PPlanningDid not plan the session, training area or sequence in advance.
OObservationDid not check entry requirements, the trainee, the work area or hazards.
TTechniqueIncorrect demonstration or training method.
VKVehicle KnowledgeNot enough understanding of the machine or plant: systems, controls, safety devices, hazards and emergency equipment.
JJudgment / CompliancePoor judgment of safety or the outcome, or a breach of site rules or the VOC criteria.
CMCommunicationDid not brief, explain, give feedback or record clearly.

RCA column: each item has its most likely root cause code. The code appears once C, F or P is ticked and is coloured by the rating: green for C, orange for F and red for P. Change the code if a different cause applies.

F and P items, with their root cause, appear on the Competency and Compliance Dashboard for managers to follow up, record the action taken and verify.

Section 1: Preparation

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
1.1Checks trainee entry requirements and records
1.2Plans the session and selects a safe training area
1.3Briefs trainee on objectives and critical-fail items

Comments / evidence:

Section 2: Delivery

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
2.1Demonstrates correctly to site and OEM standard
2.2Explains the why as well as the how
2.3Gives clear, timely and respectful feedback
2.4Keeps control of safety at all times

Comments / evidence:

Section 3: Assessment and records

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

#CriteriaCFPN/ARCA
3.1Assesses against the VOC criteria only
3.2Records factual evidence
3.3Makes a fair and consistent outcome decision
3.4Completes and files records the same day

Comments / evidence:

Section 4: complete only the section for the equipment or plant area selected above: 4A to 4O for mobile plant, 4P to 4Z for fixed plant.

Section 4A: Haul truck (rigid or articulated)

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3A of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4A.1Holds a current HR (Heavy Rigid) licence or higher, required for all haul trucks and articulated dump trucks on WA mine sites, plus site authorisation for the truck model (tick N/A if an HR licence is not required)
4A.2Correct queueing, spotting and reversing to loading unit
4A.3Loads under instruction from loader operator; stays in cab
4A.4Maintains safe position on dump / tip head; uses windrow as a marker, not a stop
4A.5Checks for underfoot hazards and edges before tipping
4A.6Lowers tray fully before moving off
4A.7Monitors payload, tyre temperatures and alarms

Comments / evidence:

Section 4B: Excavator

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3B of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4B.1Correct bench set-up: floor level, stable, track position with final drives to rear
4B.2Controlled digging and loading, no swinging over cabs
4B.3Communicates positioning with truck operators
4B.4Maintains safe face height and manages face stability / overhangs
4B.5Correct tracking and walking with bucket low

Comments / evidence:

Section 4C: Dozer

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3C of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4C.1Pushes and rips safely, maintains control on slopes
4C.2Correct edge work and windrow construction to site standard
4C.3Maintains visibility, spotter used where required
4C.4Correct walking and parking with blade and ripper grounded

Comments / evidence:

Section 4D: Wheel loader

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3D of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4D.1Loads trucks evenly and within payload
4D.2Maintains stable stockpile / face
4D.3Correct bucket height when travelling
4D.4Correct hand signals or radio when loading

Comments / evidence:

Section 4E: Grader

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3E of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4E.1Maintains road crossfall, drainage and windrow height to spec
4E.2Positions safely in traffic with correct communications
4E.3Correct blade and articulation control

Comments / evidence:

Section 4F: Water cart

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3F of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4F.1Waters to schedule without creating slippery conditions
4F.2Keeps off intersections, ramps and braking areas when watering
4F.3Correct fill-point procedure

Comments / evidence:

Section 4G: Mobile crane (non-slewing, e.g. Franna / pick and carry)

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3G of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4G.1Holds the correct high risk work licence class for the crane
4G.2Checks lift plan, load weight, load chart and ground conditions before lifting
4G.3Pre-start of hook, block, wire rope / chains, limit switches and load moment indicator
4G.4Travels with load low, within the pick and carry chart and site speed limit
4G.5Correct communication with dogman / rigger (hand signals or radio)
4G.6Keeps exclusion zone clear and never lifts over people
4G.7Maintains power line clearances
4G.8Stops lifting when wind or visibility is outside limits

Comments / evidence:

Section 4H: Slewing mobile crane (all-terrain, crawler, truck-mounted)

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3H of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4H.1Holds the correct high risk work licence class for the crane (slewing class and capacity)
4H.2Reviews lift study / lift plan, rigging and load chart for radius and configuration
4H.3Correct set-up: level ground, outriggers fully extended on pads / mats, ground bearing checked
4H.4Sets and checks load moment indicator and crane configuration settings
4H.5Barricades slew radius and tail swing zone
4H.6Controlled slewing, hoisting and luffing with smooth load control
4H.7Correct use of taglines and communication with dogman / rigger
4H.8Maintains power line clearances and monitors wind speed
4H.9Correct stowing and travel configuration after lifting

Comments / evidence:

Section 4I: Integrated tool carrier (IT) and telehandler

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3I of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4I.1Correct attachment fitted, locked and pin-checked before use
4I.2Uses load chart for boom angle, extension and attachment
4I.3Stabilisers / outriggers set where required
4I.4Travels with load low and tilted back
4I.5Never uses the machine as a work platform unless it is rated and fitted with an approved basket

Comments / evidence:

Section 4J: Forklift

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3J of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4J.1Holds a forklift high risk work licence (LF) where required
4J.2Checks load weight against the data plate
4J.3Travels with forks low and load tilted back; reverses when vision is blocked
4J.4Keeps pedestrians clear and uses horn at blind corners
4J.5Parks with forks lowered, park brake on and key removed

Comments / evidence:

Section 4K: Backhoe and skid steer loader

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3K of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4K.1Sets stabilisers before digging (backhoe)
4K.2Locates and marks underground services before digging
4K.3Maintains safe swing zone and exclusion area
4K.4Keeps the bucket low when travelling; stays within rated operating capacity (skid steer)
4K.5Uses seat bar / restraint and never leaves controls with attachment raised

Comments / evidence:

Section 4L: Drill rig (production and exploration)

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3L of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4L.1Pre-start of mast, rods, hoses, dust suppression and emergency stops
4L.2Correct set-up and levelling on pattern, away from crest and open holes
4L.3Keeps exclusion zone around rotating parts and never wears loose clothing near them
4L.4Correct rod handling and use of rod-handling system
4L.5Follows explosives and charging-area rules when working near loaded holes
4L.6Correct mast lowering and tramming procedure

Comments / evidence:

Section 4M: Scraper and compactor / roller

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3M of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4M.1Maintains safe speed and control when loaded and on grade
4M.2Correct cut, load and spread sequence (scraper)
4M.3Checks edges and soft ground before compacting
4M.4Uses correct vibration settings and stays clear of structures and services (roller)

Comments / evidence:

Section 4N: Service, fuel and lube truck

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3N of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4N.1Parks, chocks and isolates the truck at the service bay or go-line
4N.2Positive communication with the operator before approaching plant
4N.3Correct fuel and lube connection with spill kit ready
4N.4Earthing / bonding and no ignition sources during refuelling
4N.5Manages hoses and reels to avoid trip and whip hazards

Comments / evidence:

Section 4O: Tyre handler

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3O of the Mobile Plant VOC.

#CriteriaCFPN/ARCA
4O.1Correct grip, lift and rotation, exclusion zone around tyre work
4O.2Follows tyre deflation and handling procedure

Comments / evidence:

Section 4P: Conveyors

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 3 of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4P.1Inspects belts, idlers, pulleys, skirts and guards only with guards in place or plant isolated
4P.2Understands pull-wire, belt-drift and zero-speed switches
4P.3Correct cleanup procedure around conveyors (isolated, no reaching past guards)
4P.4Identifies and reports spillage, damaged guards and tracking issues

Comments / evidence:

Section 4Q: Crushers and screens

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 4 of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4Q.1Follows start-up and shutdown sequence
4Q.2Correct blockage clearing procedure (isolated, no manual clearing while running)
4Q.3Monitors feed, product size, amps and alarms
4Q.4Recognises signs of wear, vibration and overheating

Comments / evidence:

Section 4R: Processing and pumps (mills, thickeners, tanks)

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5 of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4R.1Operates from control system / panel correctly
4R.2Monitors levels, pressures and flows
4R.3Understands chemical and reagent hazards (SDS) and handles safely
4R.4Correct response to spills and bunding requirements

Comments / evidence:

Section 4S: Stackers, reclaimers and ship / train loaders

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5A of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4S.1Checks travel path, rail and cable reel before moving
4S.2Correct boom, bucket-wheel and slew control within limits
4S.3Monitors collision avoidance and anti-collision systems
4S.4Follows wind and storm shutdown procedures
4S.5Correct communication with control room and port / rail staff

Comments / evidence:

Section 4T: Feeders, bins and chutes

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5B of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4T.1Correct feed rate control and monitoring of levels
4T.2Follows hang-up and blockage procedure (no entry, isolate first)
4T.3Understands bin and hopper entry is a confined space
4T.4Recognises signs of wear and material build-up

Comments / evidence:

Section 4U: Overhead cranes, hoists and gantries

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5C of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4U.1Holds the correct licence where required (for example CB, CN, or site authorisation)
4U.2Pre-use check of hook, limits, brakes and pendant / remote
4U.3Rated capacity known and not exceeded
4U.4Keeps load clear of people and walkways; uses taglines
4U.5Correct slinging with a qualified dogman / rigger

Comments / evidence:

Section 4V: Compressors, boilers and pressure equipment

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5D of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4V.1Knows the pressure equipment hazards and relief devices
4V.2Checks pressures, temperatures and alarms against limits
4V.3Follows start-up, shutdown and blowdown procedures
4V.4Isolates and depressurises before any work

Comments / evidence:

Section 4W: Filtration, flotation and leach plant

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5E of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4W.1Monitors reagent dosing and process conditions
4W.2Understands cyanide, acid, caustic and other reagent hazards (SDS) where used
4W.3Uses gas detectors and PPE correctly in reagent areas
4W.4Correct response to leaks, spills and gas alarms

Comments / evidence:

Section 4X: Water, tailings and dewatering pumps

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5F of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4X.1Checks suction, discharge, seals and pipework
4X.2Correct priming, start-up and shutdown
4X.3Understands tailings storage facility (TSF) rules and reporting
4X.4Isolates and depressurises lines before work

Comments / evidence:

Section 4Y: Control room operation

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 5G of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4Y.1Uses the control system (SCADA / DCS) correctly
4Y.2Responds to alarms in order of priority
4Y.3Correct start / stop permissives and interlocks
4Y.4Clear communication with field operators and shift handover

Comments / evidence:

Section 4Z: Confined space entry

Key: C = Competent | F = Fair, needs coaching | P = Poor, Not Yet Competent | N/A = Not applicable

Rate whether the trainer can demonstrate, explain and correctly assess each item. Same items as Section 6 of the Fixed Plant VOC.

#CriteriaCFPN/ARCA
4Z.1Identifies the space as a confined space and knows the site register / signage
4Z.2Confined space permit obtained, understood and displayed at the entry point
4Z.3All energy and material sources isolated, locked and tested (including pipes, chutes and agitators)
4Z.4Atmosphere tested before entry and monitored continuously (oxygen, flammable, toxic)
4Z.5Ventilation set up and working where required
4Z.6Standby person in place at the entry with communication at all times
4Z.7Rescue plan and rescue equipment in place and checked before entry (harness, tripod, retrieval)
4Z.8Entry and exit recorded (entry log / tag board)
4Z.9Knows when to evacuate: alarm, change in atmosphere, loss of communication
4Z.10Permit correctly closed out and space cleared of people, tools and equipment

Comments / evidence:

Outcome

Competent Competent, coaching needed Not Yet Competent (re-assess date: )

Restrictions / conditions:

Assessor name: Assessor signature: Trainer signature: Date:

4. Ongoing Standards

  • Annual trainer VOC
  • Quarterly moderation meeting to compare assessment decisions
  • Maintain currency on the equipment trained

WA Compliance References

  • Work Health and Safety Act 2020 (WA)
  • Work Health and Safety (Mines) Regulations 2022 (WA): principal mining hazard management, mobile plant, isolation, competency and training records
  • WorkSafe WA Mines Safety codes of practice and guidance (for example mobile plant, cranes, traffic management, fatigue, isolation, confined spaces and working at heights)
  • Site Safety Management System, Traffic Management Plan and OEM operator manuals
  • High risk work licences for cranes and AS 2550 (cranes); AS 2865 (confined spaces)
  • Department of Transport WA: HR licence class for haul trucks and articulated dump trucks
  • Nationally recognised RII (Resources and Infrastructure) units for plant operations. Check current unit codes on training.gov.au before mapping VOCs to units
  • Keep training and VOC records for the life of employment and as required by the mine's record-keeping procedure